Arch Top Field Gate
£524.00
Beautifully hand-crafted Field Gate/ Farm Gate manufactured from the finest joinery graded, smooth planed, slow grown Redwood Pine. Traditional time served techniques including mortise, tenon and dowel joints to prevent the frame from “pulling” apart and ensuring a long lasting, durable field gate. Handcrafted in the UK to any width or height. Installation available.
Beautifully hand-crafted Field Gate/ Farm Gate manufactured from the finest joinery graded, smooth planed, slow grown Redwood Pine. Traditional time served techniques including mortise, tenon and dowel joints to prevent the frame from “pulling” apart and ensuring a long lasting, durable field gate. Handcrafted in the UK to any width or height.
Width: Select from “Drop down” above. Width shown is for exact width of gate required.
Height: from 3ft to 5ft (914mm to 1m 520mm) – taken to the highest point of gate (inc horns).
FIELD GATES
How to Measure
Measuring for your new gate is actually a very simple process.
  If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option. Gate is hung between pillars/ posts.
Reduce 130mm from lowest measurement (taken from "Step 1").
Mounted to "REAR" of pillars/ posts.
No reduction to width between pillars/ posts required.
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order -Â 0800 6124 965.
Measuring for Automated Gates:
For above ground automation, rear hung on the back of the posts take the smallest measurement and reduce by 50mm (this will give you the actual gate size to order).For above ground automation, hung in the centre of the posts take the smallest measurement and reduce by 150mm (this will give you the actual gate size to order).For below ground automation, rear hung on the back of the posts take the smallest measurement and plus 20mm (this will give you the actual gate size to order).For below ground automation, rear hung in the centre of the posts take the smallest measurement and reduce by 260mm (this will give you the actual gate size to order).
SOFTWOOD DRIVEWAY GATES
The Beauty of Redwood Pine
Redwood pine is known for its stunning natural beauty. It has a rich, warm color with prominent grain patterns that add elegance and charm to any gate. Its aesthetic appeal often enhances the overall look of the property. It is a durable wood, especially when properly treated and maintained. It has natural resistance to decay, rot, and insect damage, making it ideal for outdoor applications such as gates. With the right finish and care, a redwood pine gate can last for many years.
ENVIRONMENTAL BENEFITS
Redwood pine is a sustainable option. It is harvested from responsibly managed forests, ensuring that new trees are planted to replace those used. Choosing redwood pine for your gate helps support sustainable forestry practices.
SOFTWOOD DRIVEWAY GATES
The Beauty of Redwood Pine
Redwood pine is known for its stunning natural beauty. It has a rich, warm color with prominent grain patterns that add elegance and charm to any gate. Its aesthetic appeal often enhances the overall look of the property. It is a durable wood, especially when properly treated and maintained. It has natural resistance to decay, rot, and insect damage, making it ideal for outdoor applications such as gates. With the right finish and care, a redwood pine gate can last for many years.
ENVIRONMENTAL BENEFITS
Redwood pine is a sustainable option. It is harvested from responsibly managed forests, ensuring that new trees are planted to replace those used. Choosing redwood pine for your gate helps support sustainable forestry practices.
Calculating gate width with existing pillars or posts in place.
Take THREE measurements between the pillars/ posts. Across the top, middle and bottom. Make a note of the SMALLEST measurement.
There are different reductions to make depending on the farm/ field gate style and how you are going to mount the hinges (either on rear of post or internal face).
Figure 1: This set up is for a double leaf farm/ field gate. As the hinges are mounted to the rear of the post, the only reduction that is required is where the gate meets to open/ close. Gate opens inwards towards property.
Therefore, reduce lowest measurement by 10mm.
Figure 2: This set up is for a single leaf farm/ field gate. As the hinges are mounted to the rear of the post you do not need to reduce any size from your lowest measurement. Gate opens inwards towards property.
Figure 3: This set up is for a double leaf farm/ field gate. The hinges are mounted to the inner face of the posts. This allows the gate to open both ways.
Reduce 270mm (approx. 11″) from your lowest measurement.
Figure 4: This set up is for a single leaf farm/ field gate automated. The hinges are mounted to the inner face of the posts. This allows the gate to open both ways.
Reduce 130mm (approx. 5 1/5″) from your lowest measurement.
The depth, thickness and quality of materials used in the construction of our field gates is a key factor on how the gate will look and perform.
| GATE MATERIAL | |
| TIMBER | Slow Grown Redwood Pine (softwood) |
| TOP/ SIDES | 4″ x 3″ (94mm x 68mm) – Mortise, tennon & dowel jointed |
| BRACING | 4″ x 1″ (94mm x 20mm) |
| FIXINGS | Stainless Steel Screws |
| CONSTRUCTION | Mortise, tenon and dowel jointed frames |
| HANDCRAFTED | Made in the UK |
| SIZE | Bespoke available |
DELIVERY TIMES
All products are made on order. As such, delivery times can go up and down depending on order volume. We delivery across the whole of the UK (mainland only – please call if Isle of Wight etc).
Wooden Gates (inc Garage Doors): Monday 20th January to Friday 24th January. (Additional 5 - 10 working days if paint/ stain is added.)
Composite Gates: Monday 20th January to Friday 24th January.
Metal and Metal Infill Gates: Monday 20th January to Friday 24th January.
Metal Railings and Ballustrades: Monday 20th January to Friday 24th January.
Accessories (automation kits, intercoms etc): 1 to 2 working days.
For a more accurate time, please call our team on 0800 6124 965.
Need it faster? Call our team to discuss our Express Service. We can provide wooden gates, unstained in as little as 5 days.
DELIVERY CHARGES: ENGLAND & WALES
SPECIAL OFFER: Free Delivery on orders over £750 – save up to £199
- Garden Gates: £19
- Side/ Pedestrian Gates: £29
- Fence Panels & Railings: £29 (one off charge not per panel)
- Driveway Gates (softwood): £49
- Driveway Gates (Hardwood): £99
- Metal Framed Driveway Gates: £199
- Sliding Gates: £199
- Sliding Gate Kit (if purchased without a gate): £99
DELIVERY CHARGES: SCOTLAND/ HIGHLANDS
- Garden Gates: £29
- Side/ Pedestrian Gates: £59
- Fence Panels & Railings: £59 (one off charge not per panel)
- Driveway Gates (softwood): £149
- Driveway Gates (Hardwood): £149
- Metal Framed Driveway Gates: £149
- Sliding Gates: £149
- Sliding Gate Kit (if purchased without a gate): £149
Reviews
Clear filtersThere are no reviews yet.