On Sale
Sale!
%
Off
10
Save £296
296£
10%
296
£
Portsmouth 3/4 Split Driveway Gate Original price was: £2,995.00.Current price is: £2,699.00.
Back to products
On Sale
Sale!
%
Off
15
Save £476
476£
15%
476
£
Aberdeen 3/4 Split Driveway Gate Original price was: £3,185.00.Current price is: £2,709.00.

Bath 3/4 Split Driveway Gate

Original price was: £2,805.00.Current price is: £2,699.00.

Our “Prestige” gate range. Combining the strength and durability of deep metal frames with the natural beauty of hand selected timber infill to create a truly elegant gate, that really does “make an entrance”. Produced from the finest Iroko (hardwood) – a naturally aesthetically pleasing wood. Expertly crafted by hand to any size in the UK. First by our skilled fabricators then to our experienced joiners for infill. Our metal framed gate range is what we are most proud of. Attention to detail both for look and durability is paramount. Sturdy 40mm x 40mm premium frame work, smooth welded joints, solid 30mm x 15mm rear bracing bars and stainless steel screws to fix the timber into place. Installation, electric or manual opening is available on this gate. Please call for details.

  • Calculating Split Driveway Gate Size:

    Take three horizontal measurements between existing posts/ pillars – top, middle and bottom. Reduce the smallest width by 50mm (2"). Select the nearest measurement from the drop down that is smaller than your size. 

    Where-to-Measure-Driveway-Gate

    WIDTH (left side from rear)

    WIDTH (right side from rear)

    *HEIGHT

    Taken to the highest point of the gate. We recommend allowing a gap clearance of 1" (25mm).

    We offer 4 different designs. Fleur De Lys, Ball Tops, Spearheads or Arrow Tops.

    *Take measurement between posts then reduce by...

    SELECT FRAME COLOUR (free with gate)

    SATIN OR MATT?

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    SELECT TIMBER COLOUR

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    *SELECT HANDLE/ LOCK COLOUR (free with gate)

    METAL POSTS

    Due to the weight of the gates, we only recommend fitting below ground posts. Pyramid capped with fitted gate hanging pins attached to posts.

    Free with Gate

    Both handle and adjustable hinges included free of charge with each gate.

Need advice? Call our team on 0800 6124 965
SKU: 10778 Category: Tags: ,
Description

METAL FRAMED 3/4 SPLIT DRIVEWAY GATES – THE BATH

Our “Prestige” gate range. Combining the strength and durability of deep metal frames with the natural beauty of hand selected timber infill to create a truly elegant gate, that really does “make an entrance”.

Constructed using Iroko (hardwood) – a naturally aesthetically pleasing wood. Expertly crafted by hand to any size in the UK. First by our skilled fabricators then to our experienced joiners for infill. Our metal framed gate range is what we are most proud of. Attention to detail both for look and durability is paramount. Sturdy 40mm x 40mm premium frame work, smooth welded joints, solid 30mm x 15mm rear bracing bars and stainless steel screws to fix the timber into place. To help prevent the gate from twisting or warping, welded braces are placed throughout the rear of the gate to ensure the cladding is correctly fixed. As timber is a natural product, it is prone to move during the seasons – in fact, a single piece of cladding can swell or contract up to 1.5mm, therefore, unlike others, we predict this movement and all gates are produced with a (non see through) expansion gap allowing the gate to “breathe” without anyone noticing it. The gap is dependant on gate size, and is usually between 5mm and 15mm which runs along the frame, parallel to the cladding width. This ensures stability of the gate without compromising the look.

Installation? Electric or manual sliding gates – call for details.


Available Sizes:

  • Width: from 6ft (each side 3ft) to a massive 20ft (each side 10ft)
  • Height: from 4ft to 7ft – taken to the highest point of the gate.
  • Made to Measure – all gates online can be purchased to the nearest inch, if you do require a more precise size, please contact us. (Unlike others – there is NO additional cost for bespoke, we simply base price on the next size!).

Gate Furniture:

  • Included FREE of charge: 4 x Adjustable hinges (and hinge pins), stainless steel handle and lock providing ultimate protection for your home. 2 x drop bolts. As standard, the position of the hinge pin will be 6″ (150mm) from top and bottom of the gate. If you require these at a different measurement (for example, pins already set in pillars), please call to order.

Finish:

  • As standard, the framework will be finished in black (included in price) with optional finish to choose from for timber. We can also supply the frame in any RAL colour if needed.

Posts:

  • Due to the weight of these gates. We only recommend “below ground” posts for support or install to existing pillars (as long as the pillar is structurally sound).

Calculating Driveway Gate Size:

  • Take three measurements between existing posts/ pillars – top, middle and bottom (as below).
  • Take the smallest of the three widths and reduce as follows: (depending on gate set up)

Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.

Calculate-width-of-framed-split-gates-1To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).


Option 2: Gate mounted between existing posts/ pillars.

Calculate-width-of-framed-split-gates-2
To calculate gate width: Take the lowest measurement and reduce by 150mm (6″).

For further information, please call our sales team direct on 0800 6124 965.

How to Measure

Calculating gate width with existing pillars or posts in place.

Take THREE measurements between the pillars/ posts. Across the top, middle and bottom. Make a note of the SMALLEST measurement.

How-to-measure-driveway-gate-width-1

 

To determine what clearance is needed to calculate gate width, you must decide how the gate will open. The first example is by far the most popular set up.


How-to-measure-for-metal-framed-split gates
 
 

OPTION 1: (most popular set up)

Gates to open towards driveway. Hinge plates mounted to rear face of post/ pillar. Back edge of gate sits flush with the back edge of post/ pillar.

REDUCE 50mm (2″) from your lowest measurement.


How-to-measure-for-metal-framed-split gates
 
 

OPTION 2:

Driveway gates open inwards towards driveway. Hinge plates mounted to inside face of post/ pillar. Front edge of gate sits flush with the front edge of post/ pillar.

REDUCE 150mm (6″) from your lowest measurement.


Specification

The depth, thickness and quality of materials used in the construction of metal framed gates is a key factor on how the gate will look and perform. We only use the finest steel that’s generally thicker than our competitors. This ultimately produces a long lasting gate that really does “make an entrance”.

GATE MATERIAL  
FRAME 40mm x 40mm
REAR BRACING 30mm x 15mm Structural Bars
CLADDING T, G and V, 19mm Deep x 125mm Wide (nominal)
HANDLE Key Lock and Handle Included
TIMBER INFILL Hardwood Iroko
HANDCRAFTED Made in the UK
SIZE Bespoke Available
Reviews (0)
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Bath 3/4 Split Driveway Gate”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Delivery

DELIVERY TIMES

All products are made on order. As such, delivery times can go up and down depending on order volume. We delivery across the whole of the UK (mainland only – please call if Isle of Wight etc).

Wooden Gates (inc Garage Doors): Monday 20th January to Friday 24th January. (Additional 5 - 10 working days if paint/ stain is added.)

Composite Gates: Monday 20th January to Friday 24th January.

Metal and Metal Infill Gates: Monday 20th January to Friday 24th January.

Metal Railings and Ballustrades: Monday 20th January to Friday 24th January.

Accessories (automation kits, intercoms etc): 1 to 2 working days.

For a more accurate time, please call our team on 0800 6124 965.

Need it faster? Call our team to discuss our Express Service. We can provide wooden gates, unstained in as little as 5 days.

DELIVERY CHARGES: ENGLAND & WALES

SPECIAL OFFER: Free Delivery on orders over £750 – save up to £199

  • Garden Gates: £19
  • Side/ Pedestrian Gates: £29
  • Fence Panels & Railings: £29 (one off charge not per panel)
  • Driveway Gates (softwood): £49
  • Driveway Gates (Hardwood): £99
  • Metal Framed Driveway Gates: £199
  • Sliding Gates: £199
  • Sliding Gate Kit (if purchased without a gate): £99

DELIVERY CHARGES: SCOTLAND/ HIGHLANDS

  • Garden Gates: £29
  • Side/ Pedestrian Gates: £59
  • Fence Panels & Railings: £59 (one off charge not per panel)
  • Driveway Gates (softwood): £149
  • Driveway Gates (Hardwood): £149
  • Metal Framed Driveway Gates: £149
  • Sliding Gates: £149
  • Sliding Gate Kit (if purchased without a gate): £149
Shopping cart
Start typing to see products you are looking for.

CYBER MONDAY SALE | 10% Off - use code: BF10...ends today

00DAYS: 00HOURS: 00MINS: 00SECS Expired

Plus FREE Delivery over £750*

00DAYS: 00HOURS: 00MINS: 00SECS Expired

CYBER MONDAY SALE | 10% Off

00DAYS: 00HOURS: 00MINS: 00SECS Expired

Use code: BF10

00DAYS: 00HOURS: 00MINS: 00SECS Expired
0 items Cart
0 Wishlist
My account