For manual or electric sliding gates. In ground or bolt to ground track system. Designed and made by us to fit your requirements.
£1,049.00
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 50mm wide each) = 1m 160mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.
Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.
To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).
Option 2: Gate mounted in alley way or similar.
This set up example would be used if placing the gate in an alley way or similar. The allowance on the hinge side is greater and does create a visible see through section.
Reduce 100mm (or 4″) from your lowest measurement.
Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.
Estimated delivery time:
Metal and Metal Infill Gates: Monday 17th February to Friday 21st February.
Metal Railings and Ballustrades: Monday 17th February to Friday 21st February.
FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
£1,049.00
Our “Prestige” side gate range. Combining the strength and durability of deep metal frames with the natural beauty of hand selected timber infill to create a truly elegant side gate, that really does “make an entrance”.Using the finest Iroko (hardwood) – a naturally aesthetically pleasing wood. Expertly crafted by hand to any size in the UK. First by our skilled fabricators then to our experienced joiners for infill. Our metal framed gate range is what we are most proud of. Attention to detail both for look and durability is paramount. Sturdy 40mm x 40mm premium frame work, smooth welded joints, solid 30mm x 15mm rear bracing bars (if required – dependant on design) and stainless steel screws to fix the timber into place. To help prevent the gate from twisting or warping, welded braces are placed throughout the rear of the gate to ensure the cladding is correctly fixed.
