TV icon

AS SEEN ON TV

BBC One and ITV

Gates-and-Fences-UK-Reviews

TRUSTPILOT

Our customers love us

Driveway-Gate-Manufacturer-Icon-60-1

OVER 100,000 SOLD

UK’s largest bespoke gate manufacturer

Delivery Truck

FREE UK DELIVERY

On orders over £750

Sandbanks Side Gate

£1,049.00

  • *WIDTH

    This is the actual width the gate will arrive. To calculate, take three horizontal measurements between existing posts/ pillars. Reduce measurement by 50mm (2") to allow for hinge and opening clearance.

    *GATE HEIGHT

    Taken to the highest point of the gate.


    *SELECT HINGE SIDE

    Looking towards the rear of the gate, would the hinges be on the left or right hand side? 

    SELECT FRAME COLOUR (free with gate)

    SATIN OR MATT?

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    SELECT TIMBER COLOUR

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    *SELECT HANDLE COLOUR (free with gate)

    SELECT POSTS

    *Hanging or Receiving Post?

    *Base Plate Required

  • Add automation to your pedestrian/ side gate. Neatly mounted to the top corner of the gate. Provides easy access to your area with the benefit of adding additional security when used with an electronic mag lock. 24v system capable of opening gates up to 1.2m (4ft) wide - call to order if over 1.2m wide)

    Please note: No handles/ locks are needed if adding automation so will therefore not be included.

    Download Manual

    OTHER CUSTOMERS ALSO PURCHASED

    * 

How to Measure

INFORMATION

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

How-to-measure-side gate and garden gate width

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 50mm wide each) = 1m 160mm.

Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.

Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.

Calculate-width-of-metal-framed-garden-or-side-gate

To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).

Option 2: Gate mounted in alley way or similar.

Calculate-width-of-metal-framed-garden-or-side-gate

This set up example would be used if placing the gate in an alley way or similar. The allowance on the hinge side is greater and does create a visible see through section.

Reduce 100mm (or 4″) from your lowest measurement.

Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

Estimated delivery time:

Metal and Metal Infill Gates: Monday 16th December to Friday 20th December.

Metal Railings and Ballustrades: Monday 16th December to Friday 20th December.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Sandbanks Side Gate

£1,049.00

Our “Prestige” side gate range, the Sandbanks. Combining the strength and durability of deep metal frames with the natural beauty of hand selected timber infill to create a truly elegant side gate, that really does “make an entrance”. Using the finest Iroko (hardwood) – a naturally aesthetically pleasing wood. Expertly crafted by hand to any size in the UK. First by our skilled fabricators then to our experienced joiners for infill. Our metal framed gate range is what we are most proud of. Attention to detail both for look and durability is paramount. Sturdy 40mm x 40mm premium frame work, smooth welded joints, solid 30mm x 15mm rear bracing bars (if required – dependant on design) and stainless steel screws to fix the timber into place. To help prevent the gate from twisting or warping, welded braces are placed throughout the rear of the gate to ensure the cladding is correctly fixed.

  • *WIDTH

    This is the actual width the gate will arrive. To calculate, take three horizontal measurements between existing posts/ pillars. Reduce measurement by 50mm (2") to allow for hinge and opening clearance.

    *GATE HEIGHT

    Taken to the highest point of the gate.


    *SELECT HINGE SIDE

    Looking towards the rear of the gate, would the hinges be on the left or right hand side? 

    SELECT FRAME COLOUR (free with gate)

    SATIN OR MATT?

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    SELECT TIMBER COLOUR

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    *SELECT HANDLE COLOUR (free with gate)

    SELECT POSTS

    *Hanging or Receiving Post?

    *Base Plate Required

  • Add automation to your pedestrian/ side gate. Neatly mounted to the top corner of the gate. Provides easy access to your area with the benefit of adding additional security when used with an electronic mag lock. 24v system capable of opening gates up to 1.2m (4ft) wide - call to order if over 1.2m wide)

    Please note: No handles/ locks are needed if adding automation so will therefore not be included.

    Download Manual

    OTHER CUSTOMERS ALSO PURCHASED

    * 

Estimated delivery time:

Metal and Metal Infill Gates: Monday 16th December to Friday 20th December.

Metal Railings and Ballustrades: Monday 16th December to Friday 20th December.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Sandbanks Side Gate

£1,049.00

  • Expertly crafted by hand in the UK
  • Made to any size
  • Deep metal framed
  • Iroko hardwood
  • Fitted lock & handle
  • Choice of frame colour
  • Free UK delivery
  • 0% Finance available
  • *WIDTH

    This is the actual width the gate will arrive. To calculate, take three horizontal measurements between existing posts/ pillars. Reduce measurement by 50mm (2") to allow for hinge and opening clearance.

    *GATE HEIGHT

    Taken to the highest point of the gate.


    *SELECT HINGE SIDE

    Looking towards the rear of the gate, would the hinges be on the left or right hand side? 

    SELECT FRAME COLOUR (free with gate)

    SATIN OR MATT?

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    SELECT TIMBER COLOUR

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    *SELECT HANDLE COLOUR (free with gate)

    SELECT POSTS

    *Hanging or Receiving Post?

    *Base Plate Required

  • Add automation to your pedestrian/ side gate. Neatly mounted to the top corner of the gate. Provides easy access to your area with the benefit of adding additional security when used with an electronic mag lock. 24v system capable of opening gates up to 1.2m (4ft) wide - call to order if over 1.2m wide)

    Please note: No handles/ locks are needed if adding automation so will therefore not be included.

    Download Manual

    OTHER CUSTOMERS ALSO PURCHASED

    * 

How to Measure

INFORMATION

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

How-to-measure-side gate and garden gate width

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 50mm wide each) = 1m 160mm.

Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.

Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.

Calculate-width-of-metal-framed-garden-or-side-gate

To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).

Option 2: Gate mounted in alley way or similar.

Calculate-width-of-metal-framed-garden-or-side-gate

This set up example would be used if placing the gate in an alley way or similar. The allowance on the hinge side is greater and does create a visible see through section.

Reduce 100mm (or 4″) from your lowest measurement.

Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

Estimated delivery time:

Metal and Metal Infill Gates: Monday 16th December to Friday 20th December.

Metal Railings and Ballustrades: Monday 16th December to Friday 20th December.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Our “Prestige” side gate range. Combining the strength and durability of deep metal frames with the natural beauty of hand selected timber infill to create a truly elegant side gate, that really does “make an entrance”.

Using the finest Iroko (hardwood) – a naturally aesthetically pleasing wood. Expertly crafted by hand to any size in the UK. First by our skilled fabricators then to our experienced joiners for infill. Our metal framed gate range is what we are most proud of. Attention to detail both for look and durability is paramount. Sturdy 40mm x 40mm premium frame work, smooth welded joints, solid 30mm x 15mm rear bracing bars (if required – dependant on design) and stainless steel screws to fix the timber into place. To help prevent the gate from twisting or warping, welded braces are placed throughout the rear of the gate to ensure the cladding is correctly fixed. As timber is a natural product, it is prone to move during the seasons – in fact, a single piece of cladding can swell or contract up to 1.5mm, therefore, unlike others, we predict this movement and all gates are produced with a (non see through) expansion gap allowing the gate to “breathe” without anyone noticing it. The gap is dependant on gate size, and is usually between 5mm and 15mm which runs along the frame, parallel to the cladding width. This ensures stability of the gate without compromising the look.

Comes complete with a 10 year workmanship guarantee, fitted adjustable hinges/ pins, opening latch. Therefore, if fitting to existing posts/ pillars – this gate is ready to hang with no extras required.


Width of Gate: Taken as the actual gate (not opening size). This can be easily calculated – measure the distance between the pillars and reduce by 100mm (4″) or if you are purchasing our posts then the gate size required would be your opening size minus 50mm, then minus the total width of posts purchased (eg 2 x 80mm x 80mm posts would be a reduction of 160mm plus the additional 50mm meaning a total reduction of 210mm)

Height of Gate: Taken to the highest point of each gate. We recommend allowing a minimum of 25mm (1″) clearance between the bottom edge of gate and the ground. If you require a more exact height, please contact us to order.

Fitted Lock and Handle: included with the gate.

Gate Furniture: included with the gate: 2 x adjustable hinges and hinge pins. As standard, the position of the hinge will be 6″ (150mm) from the bottom edge of gate and 6″ (150mm) from top edge of gate. If you require these to be different (if for example you already have pins set into a post/ pillar), please call us.

Finish: As standard, the framework will be finished in black (included in price) with optional finish to choose from for timber. We can also supply the frame in any RAL colour if needed.

Posts: Choose between “above ground” or “below ground”. Both come with gate pins attached ready to drop the gate in place. “Above ground” posts will have a base plate.

Frequently Asked Questions

How to Measure

INFORMATION

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

How-to-measure-side gate and garden gate width

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 50mm wide each) = 1m 160mm.

Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.

Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.

Calculate-width-of-metal-framed-garden-or-side-gate

To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).

Option 2: Gate mounted in alley way or similar.

Calculate-width-of-metal-framed-garden-or-side-gate

This set up example would be used if placing the gate in an alley way or similar. The allowance on the hinge side is greater and does create a visible see through section.

Reduce 100mm (or 4″) from your lowest measurement.

Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

Specification

Produced using our “Premium” frame system. The depth, thickness and quality of materials used in the construction of metal framed composite gates is a key factor on how the gate will look and perform. We only use the finest steel that’s thicker than many of our competitors. This ultimately produces a long lasting gate that really does “make an entrance”.

GATE MATERIAL
FRAME 40mm x 40mm
REAR BRACING 30mm x 15mm Structural Bars
Timber Iroko (hardwood)
HANDLE Key Lock and Handle Included
BOARD SIZE Depth 19mm x 125mm (nominal)
HANDCRAFTED Made in the UK
SIZE Bespoke Available

Delivery

Estimated Delivery Time: Monday 16th December to Friday 20th December.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

What's included with the gate?

This gate comes complete with:

  • Lockable handle (2x keys included)
  • Adjustable hinges
  • Choice of frame colour: Black, Anthracite Grey or White (any RAL available at additional charge)

How do I maintain the gate?

We recommend re-coating the timber within 6 months of purchase then annually after that.

Frame should be inspected regularly to check for any scratches, dinks etc. If found, touch up area with suitable matching paint. Failure to do so could result in rust spots forming.

DIY Installation

All of our gates can be installed by any competent DIY’er. We recommend professional installation if having gates that are automated (electric).

See here for the installation guide.

Useful Guides

  • How to Measure Guide
  • How to Fit Guide

INFORMATION

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

How-to-measure-side gate and garden gate width

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 50mm wide each) = 1m 160mm.

Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.

Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.

Calculate-width-of-metal-framed-garden-or-side-gate

To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).

Option 2: Gate mounted in alley way or similar.

Calculate-width-of-metal-framed-garden-or-side-gate

This set up example would be used if placing the gate in an alley way or similar. The allowance on the hinge side is greater and does create a visible see through section.

Reduce 100mm (or 4″) from your lowest measurement.

Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

METAL FRAMED GATES

The Beauty of Iroko with Metal

Combining a deep metal frame with stunning Iroko timber to produce a long lasting and aesthetically pleasing driveway gate.

Iroko hardwood timber comes from the Milicia excelsa tree and is commonly known for it's warm and attractive appearance. Featuring a golden to dark brown color with interlocked grain patterns. As it ages, it tends to darken, developing a rich patina that adds to its aesthetic appeal.

With natural weather-resistant properties, which make it ideal for outdoor use. It can withstand exposure to different weather conditions, including rain, sun, and humidity, without significant deterioration. This makes it a preferred material for outdoor gates.

Overall, Iroko hardwood timber's beauty and benefits make it a popular choice for a variety of applications where strength, durability, and an appealing aesthetic are essential considerations.

Iroko is a strong and dense hardwood, making it suitable for heavy-duty applications. Its strength is comparable to teak, making it a reliable choice for construction and woodworking projects that require robust materials.

Metal Framed Driveway Gate with Iroko hardwood timber infill
Warwickshire-Driveway-Gates-1
Kingston-Driveway-Gate-modern-design-2
Stratford-Driveway-Gate
Warwickshire-Driveway-Gate-3

METAL FRAMED GATES

The Beauty of Iroko

Iroko hardwood timber comes from the Milicia excelsa tree and is commonly known for it's warm and attractive appearance. Featuring a golden to dark brown color with interlocked grain patterns. As it ages, it tends to darken, developing a rich patina that adds to its aesthetic appeal.

With natural weather-resistant properties, which make it ideal for outdoor use. It can withstand exposure to different weather conditions, including rain, sun, and humidity, without significant deterioration. This makes it a preferred material for outdoor gates.

Overall, Iroko hardwood timber's beauty and benefits make it a popular choice for a variety of applications where strength, durability, and an appealing aesthetic are essential considerations.

Iroko is a strong and dense hardwood, making it suitable for heavy-duty applications. Its strength is comparable to teak, making it a reliable choice for construction and woodworking projects that require robust materials.

Warwickshire-Driveway-Gates-1
Kingston-Driveway-Gate-modern-design-2
Warwickshire-Driveway-Gate-3

INCLUDED WITH YOUR GATE

Added Security

Fully fitted Locinox 40 security handle and lock system. Supplied with 3 keys and available in black or chrome.

Insert Lock with 100% stainless steel mechanism. The Stainless steel and adjustable self-latching bolt combined with the right keep guarantee a strong and solid closed gate where the gate wings can not be pulled apart or forced open.

  • Lock mechanism with cover plate against dirt penetration
  • Patented "Click-It" system makes tapping tread in the profile unnecessary
  • Key-operated self-latching bolt
  • Mechanism, hook, frontplate, latchbolt: stainless steel
  • Easy left or right changing of the self-latching daybolt
  • Stainless steel hook for secure anchoring
  • Compatible with all Europrofile cylinders
Lock-and-handle-for-gate
Chrome-handle-and-lock-for-metal-side-gate
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Sandbanks Side Gate”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Really "make an entrance!" - Latest customer images

What our customers think