TV icon

AS SEEN ON TV

BBC One and ITV

Gates-and-Fences-UK-Reviews

TRUSTPILOT

Our customers love us

Driveway-Gate-Manufacturer-Icon-60-1

OVER 100,000 SOLD

UK’s largest bespoke gate manufacturer

Delivery Truck

FREE UK DELIVERY

On orders over £750

Sliding Gate, The Outwood Reverse

£1,159.00

  • *WIDTH

    Total gate width for sliding gate.

    Please note: Add 800mm to opening width to allow for required overhang. See more info below

    *HEIGHT

    Taken to the highest point of the gate. We recommend leaving a gap of 25mm (1") clearance between the bottom edge of the gate and ground level. 

    Whilst looking at the back of the gate, will it slide to the left or to the right?


    *HORN DESIGN

    Change the design on the side and centre gate horns. 

    FINISH OPTIONS

    Professionally finished. Please note. Colour may look slightly different on the gate due to screen settings. Knots on the timber and screws will be visible. We do offer free samples on request. To order your free sample, please contact us.

    *ENTER RAL COLOUR CODE

    SLIDING GATE KIT

    Sliding gate kit for manual or electric opening system. After years of experience and research, we recommend (and use) this set up for sliding gates. Eliminates any additional fabrication/ welding that may otherwise be required.

    Included:

    2x Metal Receiving Posts: 4" x 4" (100mm x 100mm) 8ft long (2m 400mm). Both have (2x) pre fabricated gate catches attached. Length of 8ft to allow fitment underground, (1) x Support Post: with arm and 2x nylon rollers, (3x) 3m Ground Track, (1x) “U” Rail – 4m, (2x) Wheels.

    BOLT DOWN TRACK OR CONCRETE IN?

    WOULD YOU LIKE US TO FIT THE WHEELS?

    Supplied and fitted to your sliding gate. We recommend adding this option. Fitting wheels yourself can be a challenge due to the weight of the gate. 

    AUTOMATION KITS

    Supplied to us by BFT, one of the most reliable automation manufacturers out there. All kits come complete with a 2 year manufacturers guarantee.

    Gate over 4m wide? Add additional nylon tooth racking...

    * 

Estimated delivery time: Monday 2nd December to Friday 6th December. (Additional 5 - 10 working days if paint/ stain is added.)

Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Sliding Gate, The Outwood Reverse

£1,159.00

Manufactured by hand to any size in the UK. Produced using the finest, hand selected slow grown Redwood Pine using traditional, time served construction techniques. Electric or manual operating systems. Sliding gate will arrive in two sections and is simply bolted together on site.

  • *WIDTH

    Total gate width for sliding gate.

    Please note: Add 800mm to opening width to allow for required overhang. See more info below

    *HEIGHT

    Taken to the highest point of the gate. We recommend leaving a gap of 25mm (1") clearance between the bottom edge of the gate and ground level. 

    Whilst looking at the back of the gate, will it slide to the left or to the right?


    *HORN DESIGN

    Change the design on the side and centre gate horns. 

    FINISH OPTIONS

    Professionally finished. Please note. Colour may look slightly different on the gate due to screen settings. Knots on the timber and screws will be visible. We do offer free samples on request. To order your free sample, please contact us.

    *ENTER RAL COLOUR CODE

    SLIDING GATE KIT

    Sliding gate kit for manual or electric opening system. After years of experience and research, we recommend (and use) this set up for sliding gates. Eliminates any additional fabrication/ welding that may otherwise be required.

    Included:

    2x Metal Receiving Posts: 4" x 4" (100mm x 100mm) 8ft long (2m 400mm). Both have (2x) pre fabricated gate catches attached. Length of 8ft to allow fitment underground, (1) x Support Post: with arm and 2x nylon rollers, (3x) 3m Ground Track, (1x) “U” Rail – 4m, (2x) Wheels.

    BOLT DOWN TRACK OR CONCRETE IN?

    WOULD YOU LIKE US TO FIT THE WHEELS?

    Supplied and fitted to your sliding gate. We recommend adding this option. Fitting wheels yourself can be a challenge due to the weight of the gate. 

    AUTOMATION KITS

    Supplied to us by BFT, one of the most reliable automation manufacturers out there. All kits come complete with a 2 year manufacturers guarantee.

    Gate over 4m wide? Add additional nylon tooth racking...

    * 

Estimated delivery time: Monday 2nd December to Friday 6th December. (Additional 5 - 10 working days if paint/ stain is added.)

Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Sliding Gate, The Outwood Reverse

£1,159.00

Manufactured by hand to any size in the UK. Produced using the finest, hand selected slow grown Redwood Pine using traditional, time served construction techniques. Electric or manual operating systems. Sliding gate will arrive in two sections and is simply bolted together on site.

  • *WIDTH

    Total gate width for sliding gate.

    Please note: Add 800mm to opening width to allow for required overhang. See more info below

    *HEIGHT

    Taken to the highest point of the gate. We recommend leaving a gap of 25mm (1") clearance between the bottom edge of the gate and ground level. 

    Whilst looking at the back of the gate, will it slide to the left or to the right?


    *HORN DESIGN

    Change the design on the side and centre gate horns. 

    FINISH OPTIONS

    Professionally finished. Please note. Colour may look slightly different on the gate due to screen settings. Knots on the timber and screws will be visible. We do offer free samples on request. To order your free sample, please contact us.

    *ENTER RAL COLOUR CODE

    SLIDING GATE KIT

    Sliding gate kit for manual or electric opening system. After years of experience and research, we recommend (and use) this set up for sliding gates. Eliminates any additional fabrication/ welding that may otherwise be required.

    Included:

    2x Metal Receiving Posts: 4" x 4" (100mm x 100mm) 8ft long (2m 400mm). Both have (2x) pre fabricated gate catches attached. Length of 8ft to allow fitment underground, (1) x Support Post: with arm and 2x nylon rollers, (3x) 3m Ground Track, (1x) “U” Rail – 4m, (2x) Wheels.

    BOLT DOWN TRACK OR CONCRETE IN?

    WOULD YOU LIKE US TO FIT THE WHEELS?

    Supplied and fitted to your sliding gate. We recommend adding this option. Fitting wheels yourself can be a challenge due to the weight of the gate. 

    AUTOMATION KITS

    Supplied to us by BFT, one of the most reliable automation manufacturers out there. All kits come complete with a 2 year manufacturers guarantee.

    Gate over 4m wide? Add additional nylon tooth racking...

    * 

Estimated delivery time: Monday 2nd December to Friday 6th December. (Additional 5 - 10 working days if paint/ stain is added.)

Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

SLIDING GATES

How to Measure

Measuring for your new sliding gate is actually a very simple process.

   Simply take a measurement of your opening.

How-to-measure-sliding gate

Please note:

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.

For a sliding gate to work, an overhang of 800mm is required. This is to hold the gate upright whilst opening/ closing.

So, your sliding gate width will be “opening width” + 800mm.

For example, if opening width = 3m 420mm (+ 800mm overhang) then the width is 4m 220mm.

Sliding gate showing overhang

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order – 0800 6124 965.

MADE IN THE UK

Expertly Crafted by Hand

All of our gates are expertly crafted by hand in the UK using time served construction techniques. Unlike others, we do not pin our gates together. We use a traditional framing method. Mortise and tenon joints, along with dowels, are a traditional woodworking technique that provide strong and durable connections between frame members. Combining these joints in a wooden frame enhances stability and longevity. When it comes to securing the cladding to the frame, we only use stainless steel screws. Standard screws will rust leading to the gate’s structure to fail over time. Hardwood is a lot more of a stable timber compared to softwood but will expand and shrink during different stages throughout the year. This is completely normal. To protect this, we rebate the inner legs of the gate. This allows the cladding to expand and contract without causing any damage to the frame and without it being noticeable when looking at the gate.

Finish is in the detail. Routered detailing to the edges of the gate, creating a more polished and refined appearance. This decorative touch enhances the overall visual appeal of the gate, making it stand out as a well-crafted and finished piece.

We welcome and encourage our customers to come and visit our factory and see gates being produced for themselves.

FRAMED 3″ x 3″ (68mm x 68mm) – Mortise, tennon & dowel jointed
SLIDING RAIL 195mm x 44mm (for channel to fix to)
SOLID BOTTOM RAIL 4″ x 3″ (95mm x 68mm) – Mortise, tennon & dowel jointed
REAR BRACING 3″ x 2″ (68mm x 47mm)
CLADDING T, G and V, 19mm Deep x 125mm Wide (nominal)
FIXINGS Stainless Steel Screws
Mortise-tenon-and-dowel-jointed-frame
measuring-tape

Made to Measure

Mortice tenon

Mortise, Tenon & Dowel Joints

Rebated Frame

Stainless Steel Screws

Routered Edging

Routered Edging

Made in the UK

Made in the UK

measuring-tape

Made to Measure

Stainless Steel Screws

Mortice tenon

Mortise, Tenon & Dowel Joints

Routered Edging

Routered Edging

Rebated Frame

Made in the UK

Made in the UK

MANUAL OR ELECTRIC

Sliding Gate Kit

Designed for electric or manual sliding gates.

Complete kit that includes track, “U” rail, support post (with nylon rollers) and receiving posts.

Sliding Gate set up example

How much room do I need for a sliding gate?

For a sliding gate vto fully open, you need opening width plus the overhang.

Example: If you have an opening of 3m, the space required to fully open would be 3m + 800mm overhang.

Why does the gate need an overhang?

Overhangs are required to hold the gate upright whilst opening/ closing. The support post connects to the overhang via “U” rail.

Does the sliding gate come as one gate?

No. For most the gate comes in two sections. One section will include the overhang. The gate just bolt together on site. This is due to the sheer weight of the gate and the logistics of moving something so big.

Can the overhang be smaller?

The overhang needs to be 800mm for the support post to connect to.

How does the track fix to the ground?

As standard, we supply concrete in tracks. Visibly, these are better than bolt down tracks. We can supply bolt down tracks on request.