TV icon

AS SEEN ON TV

BBC One and ITV

Gates-and-Fences-UK-Reviews

TRUSTPILOT

Our customers love us

Driveway-Gate-Manufacturer-Icon-60-1

OVER 100,000 SOLD

UK’s largest bespoke gate manufacturer

Delivery Truck

FREE UK DELIVERY

On orders over £750

Warwickshire Composite Driveway Gate

Original price was: £2,449.00.Current price is: £1,979.00.

  • eco-friendly-composite Eco-Friendly
  • Recycled Composite Boards 95% Recycled Materials
  • "UltraSheild" Technology
  • Advanced UV Protection
  • measuring-tape-icon Made to Measure
  • Free Nationwide Delivery
  • Expertly Crafted in the UK
  • 0% Finance Available
Anthracite
Light Grey (Stone)
Teak
Ebony (Black)
Antique
Walnut
  • Calculating Driveway Gate Size:

    Take three horizontal measurements between existing posts/ pillars – top, middle and bottom. Reduce the smallest width by 50mm (2"). Select the nearest measurement from the drop down that is smaller than your size. 

    *WIDTH

    Actual gate width for both sides added together. For example, if you selected a width from the drop down of 10ft (3m 048mm), you would receive 2 gates at 5ft wide (1m 524mm).

    *HEIGHT

    Taken to the highest point of the gate. We recommend allowing a gap clearance of 1" (25mm).

    *Take measurement between posts then reduce by...

    SELECT FRAME COLOUR (free with gate)

    SATIN OR MATT?

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    *SELECT HANDLE/ LOCK COLOUR (free with gate)

    METAL POSTS

    Due to the weight of the gates, we only recommend fitting below ground posts. Pyramid capped with fitted gate hanging pins attached to posts.

    Free with Gate

    Both handle and adjustable hinges included free of charge with each gate.

    ADDING AUTOMATION NOW OR IN THE FUTURE?

    Extra support for the gate is needed if planning on automating your gates. This is due to the force of the automation to the gate. Standard rails (over time) will fail. Add either a strengthened middle rail if attaching automation arms to middle of the gate (also know as above ground automation), or bottom middle rail if using underground automation.


    AUTOMATION KITS

    Supplied to us by BFT, one of the most reliable automation manufacturers out there. All kits come complete with a 2 year manufacturers guarantee.

    * 

  • *Select Cladding

    Reset options
How to Measure

DRIVEWAY GATES

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.

Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.

Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.

How to measure for metal framed driveway gates

To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).

Option 2: Gate mounted between existing posts/ pillars.

How-to-measure-for-metal-framed-driveway-gates-2

To calculate gate width: Take the lowest measurement and reduce by 150mm (6″).

Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

Estimated Delivery Time: Monday 9th December to Friday 13th December.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Warwickshire Composite Driveway Gate

Original price was: £2,449.00.Current price is: £1,979.00.

Anthracite
Light Grey (Stone)
Teak
Ebony (Black)
Antique
Walnut
  • Calculating Driveway Gate Size:

    Take three horizontal measurements between existing posts/ pillars – top, middle and bottom. Reduce the smallest width by 50mm (2"). Select the nearest measurement from the drop down that is smaller than your size. 

    *WIDTH

    Actual gate width for both sides added together. For example, if you selected a width from the drop down of 10ft (3m 048mm), you would receive 2 gates at 5ft wide (1m 524mm).

    *HEIGHT

    Taken to the highest point of the gate. We recommend allowing a gap clearance of 1" (25mm).

    *Take measurement between posts then reduce by...

    SELECT FRAME COLOUR (free with gate)

    SATIN OR MATT?

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    *SELECT HANDLE/ LOCK COLOUR (free with gate)

    METAL POSTS

    Due to the weight of the gates, we only recommend fitting below ground posts. Pyramid capped with fitted gate hanging pins attached to posts.

    Free with Gate

    Both handle and adjustable hinges included free of charge with each gate.

    ADDING AUTOMATION NOW OR IN THE FUTURE?

    Extra support for the gate is needed if planning on automating your gates. This is due to the force of the automation to the gate. Standard rails (over time) will fail. Add either a strengthened middle rail if attaching automation arms to middle of the gate (also know as above ground automation), or bottom middle rail if using underground automation.


    AUTOMATION KITS

    Supplied to us by BFT, one of the most reliable automation manufacturers out there. All kits come complete with a 2 year manufacturers guarantee.

    * 

  • *Select Cladding

    Reset options
How to Measure

DRIVEWAY GATES

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.

Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.

Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.

How to measure for metal framed driveway gates

To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).

Option 2: Gate mounted between existing posts/ pillars.

How-to-measure-for-metal-framed-driveway-gates-2

To calculate gate width: Take the lowest measurement and reduce by 150mm (6″).

Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

Estimated Delivery Time: Monday 9th December to Friday 13th December.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Warwickshire Composite Driveway Gate

Original price was: £2,449.00.Current price is: £1,979.00.

Eco friendly composite driveway gate, the Warwickshire. Constructed from 60% bamboo (FSC 100% Certified) and 40% recycled High Density Polyethylene, environmentally gentle bonding agent, additives and tint. Saving these materials from landfill, giving them value and recycling them into a long life product, provides a harmonious solution to sustainable living all set within a deep metal frame using UK steel to produce an extremely durable and low maintenance gate.

Anthracite
Light Grey (Stone)
Teak
Ebony (Black)
Antique
Walnut
  • Calculating Driveway Gate Size:

    Take three horizontal measurements between existing posts/ pillars – top, middle and bottom. Reduce the smallest width by 50mm (2"). Select the nearest measurement from the drop down that is smaller than your size. 

    *WIDTH

    Actual gate width for both sides added together. For example, if you selected a width from the drop down of 10ft (3m 048mm), you would receive 2 gates at 5ft wide (1m 524mm).

    *HEIGHT

    Taken to the highest point of the gate. We recommend allowing a gap clearance of 1" (25mm).

    *Take measurement between posts then reduce by...

    SELECT FRAME COLOUR (free with gate)

    SATIN OR MATT?

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    *SELECT HANDLE/ LOCK COLOUR (free with gate)

    METAL POSTS

    Due to the weight of the gates, we only recommend fitting below ground posts. Pyramid capped with fitted gate hanging pins attached to posts.

    Free with Gate

    Both handle and adjustable hinges included free of charge with each gate.

    ADDING AUTOMATION NOW OR IN THE FUTURE?

    Extra support for the gate is needed if planning on automating your gates. This is due to the force of the automation to the gate. Standard rails (over time) will fail. Add either a strengthened middle rail if attaching automation arms to middle of the gate (also know as above ground automation), or bottom middle rail if using underground automation.


    AUTOMATION KITS

    Supplied to us by BFT, one of the most reliable automation manufacturers out there. All kits come complete with a 2 year manufacturers guarantee.

    * 

  • *Select Cladding

    Reset options

Estimated Delivery Time: Monday 9th December to Friday 13th December.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

ULTRASHIELD TECHNOLOGY

Benefit of Composite Driveway Gates

Eco-friendly composite driveway gate combining a deep metal frame with the latest composite board to create a gate that “really makes an entrance”. Constructed from 95% recycled materials and fully recyclable making it an extremely environmentally friendly gate.

  • "UltraShield" Technology

Composite that is built differently. With UltraShield, a wipe-clean is all you need to keep your boards looking as good as the day you bought them. With it’s unique UltraShield formula fully capped around every board, there is no worrying about the traditional fading, staining, or mildew issues that often face timber gates. UltraShield is simply the best solution for minimal maintenance and maximum visual impact. Boasting a market leading 10 year colour warranty.

Included with the Gate:

  • Choice of composite: Anthracite Grey, Ebony (black), Walnut, Teak, Light Grey (stone) and Antique.

Order your free composite samples available here.

  • Powder coated frame in black, anthracite grey or white. Option to add any RAL colour for additional charge.
  • Locinox lock and handle, drop bolts, wall pins and hinges

Available Sizes:

  • Width: from 6ft (each side 3ft) to a massive 20ft (each side 10ft)
  • Height: from 4ft to 6ft 4″- taken to the highest point of the gate.
  • Made to Measure – all gates online can be purchased to the nearest inch, if you do require a more precise size, please contact us. (Unlike others – there is NO additional cost for bespoke, we simply base price on the next size!).

Frequently Asked Questions

How to Measure

DRIVEWAY GATES

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.

Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.

Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.

How to measure for metal framed driveway gates

To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).

Option 2: Gate mounted between existing posts/ pillars.

How-to-measure-for-metal-framed-driveway-gates-2

To calculate gate width: Take the lowest measurement and reduce by 150mm (6″).

Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

Specification

Produced using our “Premium” frame system. The depth, thickness and quality of materials used in the construction of metal framed composite gates is a key factor on how the gate will look and perform. We only use the finest steel that’s thicker than many of our competitors. This ultimately produces a long lasting gate that really does “make an entrance”.

GATE MATERIAL
FRAME 40mm x 40mm
REAR BRACING 30mm x 15mm Structural Bars
COMPOSITE 95% Recycled Materials – UltraShield
HANDLE Key Lock and Handle Included
BOARD SIZE Depth 21mm x 139mm
HANDCRAFTED Made in the UK
SIZE Bespoke Available

Delivery

Estimated Delivery Time: Monday 9th December to Friday 13th December.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

What's included with the gate?

This gate comes complete with:

  • Lockable handle (2x keys included)
  • Drop bolts
  • Adjustable hinges
  • Choice of frame colour: Black, Anthracite Grey or White (any RAL available at additional charge)
  • Composite: Anthracite Grey, Walnut, Teak, Light Grey (stone), Ebony (black) or Antique.

How do I maintain the gate?

Easily! Simply wash your composite gate down with warm, soapy water and rinse off. Any chips to the frame can be touched up using a paint pen.

Composite gates are the easiest material to maintain…no need for painting or staining.

DIY Installation

All of our gates can be installed by any competent DIY’er. We recommend professional installation if having gates that are automated (electric).

See here for the installation guide.

Useful Guides

  • How to Measure Guide
  • How to Fit Guide
  • Composite Care Guide

COMPOSITE GATES

Composite Board Choice

We offer 5 different boards, Anthracite Grey, Light Grey (Stone), Teak, Antique or Walnut. The board is capped 360 degrees which will give the board maximum protection against mold/mildew, stains, fading, cracking, cupping, and swelling.

To order your free samples, please see here.

Anthracite Grey Composite Boards

Anthracite Grey

Light Grey Composite Board

Light Grey (Stone)

Teak Composite Board

Teak

Antique Composite Board

Antique

Walnut Composite Board

Walnut

Ebony Black Composite

Ebony (Black)

Anthracite Grey Composite Boards

Anthracite Grey

Light Grey Composite Board

Light Grey (Stone)

Teak Composite Board

Teak

Antique Composite Board

Antique

Walnut Composite Board

Walnut

Ebony Black Composite

Ebony (Black)

INCLUDED WITH YOUR GATE

Added Security

Fully fitted Locinox 40 security handle and lock system. Supplied with 3 keys and available in black or chrome.

Insert Lock with 100% stainless steel mechanism. The Stainless steel and adjustable self-latching bolt combined with the right keep guarantee a strong and solid closed gate where the gate wings can not be pulled apart or forced open.

  • Lock mechanism with cover plate against dirt penetration
  • Patented "Click-It" system makes tapping tread in the profile unnecessary
  • Key-operated self-latching bolt
  • Mechanism, hook, frontplate, latchbolt: stainless steel
  • Easy left or right changing of the self-latching daybolt
  • Stainless steel hook for secure anchoring
  • Compatible with all Europrofile cylinders
Lock-and-handle-for-gate
Chrome-handle-and-lock-for-metal-side-gate

DRIVEWAY GATES

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.

Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.

Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.

How to measure for metal framed driveway gates

To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).

Option 2: Gate mounted between existing posts/ pillars.

How-to-measure-for-metal-framed-driveway-gates-2

To calculate gate width: Take the lowest measurement and reduce by 150mm (6″).

Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Warwickshire Composite Driveway Gate”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Really "make an entrance!" - Latest customer images

What our customers think