Constructed by hand using our “Premium” frame system for ultimate performance, look and durability.
GATE MATERIAL | |
HANGING STYLE | 40mm x 40mm |
BOTTOM RAIL | 40mm x 40mm |
TOP & MIDDLE RAIL | 40mm x 10mm |
MAIN INFILL BARS | 16mm Diameter |
BBC One and ITV
Our customers love us
UK’s largest bespoke gate manufacturer
On orders over £750
£475.00
Handcrafted in the UK by skilled craftsmen using the finest materials to provide ultimate durability and quality. Unlike some competitors, our gate material is thicker, comes complete with a 10 year workmanship guarantee, adjustable hinges/ pins, opening latch. Therefore, if fitting to existing posts/ pillars – this gate is ready to hang with no extras required.
Advice? Call our team today
Expertly crafted to perfection
BUDE METAL SIDE GATE:
Handcrafted in the UK by skilled craftsmen using the finest materials to provide ultimate durability and quality. Unlike our competitors, our gate material is thicker, comes complete with a 10 year workmanship guarantee, adjustable hinges/ pins, opening latch. Therefore, if fitting to existing posts/ pillars – this gate is ready to hang with no extras required.
How to Measure: Take three measurements (top, middle and bottom) horizontally between the pillars. Reduce size by 4″ (100mm). The size you end up with is the gate width required.
Width of Gate: Taken as the actual gate (not opening size). This can be easily calculated – measure the distance between the pillars and reduce by 100mm (4″).
Height of Gate: Taken to the highest point of each gate. We recommend allowing a 50mm (2″) clearance between the bottom edge of gate and driveway (as long as the drive is level). If you require a more exact height, please contact us to order.
Gate Furniture (hinges etc): 2 x adjustable hinges, hinge pins, closing receiver and opening latch included with each gate (enough to hang direct on existing posts/ pillars). As standard, the position of the hinge will be 6″ (150mm) from the bottom edge of gate and 6″ (150mm) from top edge of gate. If you require these to be different (if for example you already have pins set into a post/ pillar), please call us.
Metal Gate Posts:80mm x 80mm. Supplied to allow the posts to sit in the ground to a recommended depth of 2ft or above ground posts designed to be mounted against an existing pillar or wall.
Size of Gate not listed? No problem, call us with your exact size.
Constructed by hand using our “Premium” frame system for ultimate performance, look and durability.
GATE MATERIAL | |
HANGING STYLE | 40mm x 40mm |
BOTTOM RAIL | 40mm x 40mm |
TOP & MIDDLE RAIL | 40mm x 10mm |
MAIN INFILL BARS | 16mm Diameter |
All products are made on order. As such, delivery times can go up and down depending on order volume. We delivery across the whole of the UK (mainland only – please call if Isle of Wight etc).
Wooden Gates (inc Garage Doors): Week commencing 8th of Janurary. (If adding a stain or paint finish, please allow a further 5 days.)
Composite Gates: Week commencing 22nd of January.
Metal and Metal Infill Gates: Week commencing 22nd of January.
Metal Railings and Ballustrades: Week commencing 22nd of January.
Fence Panels: 7 to 14 days
Accessories (automation kits, intercoms etc): 1 to 2 working days.
This is a week commencing date and can therefore be any day from the 22nd till the 29th of Janurary. For a more accurate time, please call our team on 0800 6124 965.
Need it faster? Call our team to discuss our Express Service. We can provide wooden gates, unstained in as little as 5 days.
SPECIAL OFFER: Free Delivery on orders over £750 – save up to £199
First, take three measurements (top, middle and bottom) between the posts/ pillars. Make a note of the LOWEST size.
Reduce the size depending on how you would like the gate to be hung.
Inner post hung. Reduce opening width by 100mm or 4″.
Rear post hung. Reduce opening width by 50mm or 2″.
All products are made on order. As such, delivery times can go up and down depending on order volume. We delivery across the whole of the UK (mainland only – please call if Isle of Wight etc).
Wooden Gates (inc Garage Doors): Week commencing 8th of Janurary. (If adding a stain or paint finish, please allow a further 5 days.)
Composite Gates: Week commencing 22nd of January.
Metal and Metal Infill Gates: Week commencing 22nd of January.
Metal Railings and Ballustrades: Week commencing 22nd of January.
Fence Panels: 7 to 14 days
Accessories (automation kits, intercoms etc): 1 to 2 working days.
This is a week commencing date and can therefore be any day from the 22nd till the 29th of Janurary. For a more accurate time, please call our team on 0800 6124 965.
Need it faster? Call our team to discuss our Express Service. We can provide wooden gates, unstained in as little as 5 days.
SPECIAL OFFER: Free Delivery on orders over £750 – save up to £199
Yes. Not all entrance width’s are the same. You can order online to the nearest inch or call our team on 0800 6124 965 to order to the millimeter.
Gate Furniture (hinges etc) 2 x adjustable hinges, hinge pins with plate to mount on posts/ pillars, closing receiver and opening latch included with each gate (enough to hang direct on existing posts/ pillars).
Finish. Choice of black, white or anthracite grey. For a longer lasting finish, we recommend upgrading finish to “Longlife”.
As standard, the position of the hinge will be 6″ (150mm) from the bottom edge of gate and 6″ (150mm) from top edge of gate. If you require these to be different (if for example you already have pins set into a post/ pillar), please call us.
Any competent DIY’er can fit a side gate. Take a look at our guide here for more information or download PDF.
Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.
Our standard finish will scratch and chip easier resulting in more maintenance and a higher risk of rust spots forming.
We are able to paint any gate in any RAL colour. RAL colours are coded so by providing us with the RAL code we can finish your gate to your chosen colour.
Do see all the RAL colours and codes…see https://www.ralcolorchart.com/
Yes. For any product up to £6000.
Zopa Ltd t/a DivideBuy credit agreements are not regulated by the Financial Conduct Authority and do not fall under the jurisdiction of the Financial Ombudsman Service. Credit is available to permanent UK residents aged 18+, subject to status, any missed payments may affect your ability to obtain credit from DivideBuy and other lenders. Please spend responsibly.
10 year workmanship warranty. This covers all welds on the gate.
It does not cover rust. Rust can occur when the gate paint is chipped and the damage not repaired. General maintenance and care of the gate is the owners responsibility.
Taken to the highest point of each gate.
We recommend allowing a 50mm (2″) clearance between the bottom edge of gate and driveway (as long as the drive is level). If you require a more exact height, please contact us to order.
Taken as the actual gate (not opening size).
Yes, by our skilled fabricators.
All of our products are crafted by hand from our factory in Devon and sent across the whole of the UK (mainland).
To keep installation cost’s down for the end user, we work closely with a number of gate installation companies throught the UK. This way we are able to recommend a reliable company close to you saving you additional travel expense cost’s.
Call our team to discuss on 0800 6124 965.
SEEMLESS MATCH
Custom RAL colours available on any gate
Metal side gates are always fitted to pins mounted on metal posts, walls or timber. You simply lift the gate on to the pins to hang.
We offer three different options:
Included free with gate. Hinge pin plates with adjustable eye bolts and opening latch with receiver. These can be attached to existing walls, timber posts or metal posts.
Please note: As we do not know what material these plates are being connected to, fixings are not included.
Purchase new metal posts from us with your gate. The posts will have the hinge pins welded to them.
Select either above ground or below ground posts. With above ground you can select with or without base plates depending on whether you will be fixing post to floor or wall. Adjustable eye bolts and opening latch with receiver included.
Your posts or pillars already have pins in place. We can manufacture your new gate so that it can drop directly on to existing gate pins. Please call our team to order (0800 6124 965). They will explain in detail what measurements we need to take.
Upgrade your standard opening latch to a fully fitted Locinox 40 security handle and lock system. Supplied with 3 keys and available in black or chrome.
Insert Lock with 100% stainless steel mechanism. The Stainless steel and adjustable self-latching bolt combined with the right keep guarantee a strong and solid closed gate where the gate wings can not be pulled apart or forced open.
Any competent DIYer is able to fit metal side/ pedestrian gate.
Check out the guide here.
Click one of our contacts below to chat on WhatsApp