Original price was: £629.00.£605.00Current price is: £605.00.
Wooden Driveway Gates – The Earlswood
- Expertly crafted by hand in the UK
- Made to any size
- Mortise, tenon and dowel jointed
- Stainless steel fixings
- Routered edging
- Rebated frame
- Free UK delivery (over £750)
- 0% Finance available
Simply take three horizontal measurements…top, middle and bottom. Take SMALLEST width.
Reduce width by 40mm to allow for 15mm per side for hinge clearance and 10mm for centre opening clearance.
Width: Total width of gate with both leafs together. Example, order 3m 200mm wide, receive 2x 1m 600mm.
Height: Taken from lowest to highest point of the gate including the horns. We recommend a ground clearance from floor to bottom of gate of 50mm (2″) .
Estimated delivery time: Monday 21st April to Friday 25th April. (Additional 5 – 10 working days if paint/ stain is added.)
Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.
FREE (mainland) delivery on orders over £750 (excludes Scotland). See “here” for more.
Need advice?
Call our team on 0800 6124 965
Monday to Friday 9am to 5pm
0%
Finance Available.
Up to £6000. Spread the costs. Apply at checkout or call for more details.
MADE IN THE UK
Expertly Crafted by Hand
All of our gates are expertly crafted by hand in the UK using time served construction techniques. Unlike others, we do not pin our gates together. We use a traditional framing method. Mortise and tenon joints, along with dowels, are a traditional woodworking technique that provide strong and durable connections between frame members. Combining these joints in a wooden frame enhances stability and longevity. When it comes to securing the cladding to the frame, we only use stainless steel screws. Standard screws will rust leading to the gate’s structure to fail over time. Hardwood is a lot more of a stable timber compared to softwood but will expand and shrink during different stages throughout the year. This is completely normal. To protect this, we rebate the inner legs of the gate. This allows the cladding to expand and contract without causing any damage to the frame and without it being noticeable when looking at the gate.
Finish is in the detail. Routered detailing to the edges of the gate, creating a more polished and refined appearance. This decorative touch enhances the overall visual appeal of the gate, making it stand out as a well-crafted and finished piece.
We welcome and encourage our customers to come and visit our factory and see gates being produced for themselves.
Specification
| FRAMED | 3″ x 3″ (70mm x 70mm) – Mortise, tennon & dowel jointed |
| REAR BRACING | 3″ x 2″ (70mm x 47mm) |
| CLADDING | T, G and V, 19mm Deep x 125mm Wide (nominal) |
| FIXINGS | Stainless Steel Screws |
DRIVEWAY GATES
How to Measure
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option. Gate hinges are mounted to the rear of post. A gap of 15mm between edge of gap and post (each side) and a centre gap of 10mm for opening/ closing.
Reduce 40mm off your smallest measurement (from “Step 1”).
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order – 0800 6124 965.
WOODEN DRIVEWAY GATES
The Beauty of Redwood Pine
Redwood pine is known for its stunning natural beauty. It has a rich, warm color with prominent grain patterns that add elegance and charm to any gate. Its aesthetic appeal often enhances the overall look of the property. It is a durable wood, especially when properly treated and maintained. It has natural resistance to decay, rot, and insect damage, making it ideal for outdoor applications such as gates. With the right finish and care, a redwood pine gate can last for many years.
ENVIRONMENTAL BENEFITS
Redwood pine is a sustainable option. It is harvested from responsibly managed forests, ensuring that new trees are planted to replace those used. Choosing redwood pine for your gate helps support sustainable forestry practices.
Finish is in the detail. Routered detailing to the edges of the gate, creating a more polished and refined appearance. This decorative touch enhances the overall visual appeal of the gate, making it stand out as a well-crafted and finished piece.
We welcome and encourage our customers to come and visit our factory and see gates being produced for themselves.
GATES AND FENCES UK
Optional Extras
Your Gate…Your Colour
Professionally applied. We offer a range of finish options for your gate. Clear oil, standard range of paint colours:
- White
- Anthracite Grey
- Black
- Rosewood
- Grey/ Blue
- Chartwell Green
- Pebble grey
Have it your way. Match your home, any RAL colour finish is available.
Adjustable Gate Hinges
Available in either galvanised or galvanised and black finish. Heavy duty adjustable gate hinge set which includes:
- 4x Adjustable Hinges
- 4x Hinge Pins
- 2x Drop bolts
- Brenton bolt
- Opening Latch
- Fixings (for gate only)
For gates over 10ft wide, we recommend our 36″ adjustable set.
All hinge sets come with a 5 yr guarantee.
Engraving
Custom engraving. Add your house name, number and road name etc.
Only available on flat top gates.
Gate Automation
Add some power!
Above ground kit or below ground kit available. All systems are backed with a manufacturer warranty.
If you are thinking of adding automation to your gate in the future, order your gate with the centre rail, automation ready.
