Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Lemmington Estate Gate
Original price was: £2,659.00.£2,325.00Current price is: £2,325.00.
DRIVEWAY GATES
How to Measure
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.
Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.
To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).
Option 2: Gate mounted between existing posts/ pillars.
To calculate gate width: Take the lowest measurement and reduce by 150mm (6″).
Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.
Estimated Delivery Time: Monday 10th June to Friday 14th June.
FREE UK (mainland) delivery on orders over £750. Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
Lemmington Estate Gate
Original price was: £2,659.00.£2,325.00Current price is: £2,325.00.
Our “Prestige” gate range. Combining the strength and durability of deep metal frames with the natural beauty of hand selected timber infill to create a truly elegant gate, that really does “make an entrance”. Expertly crafted by hand to any size in the UK. Attention to detail both for look and durability is paramount. Sturdy 40mm x 40mm premium frame work, smooth welded joints, solid 30mm x 15mm rear bracing bars and stainless steel screws to fix the timber into place.
Estimated delivery time: Monday 10th June to Friday 14th June.
FREE UK (mainland) delivery on orders over £750. Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
Lemmington Estate Gate
Original price was: £2,659.00.£2,325.00Current price is: £2,325.00.
- Expertly crafted by hand in the UK
- Made to any size
- Deep metal framed
- Iroko hardwood
- Fitted lock & handle
- Choice of frame colour
- Free UK delivery
- 0% Finance available
DRIVEWAY GATES
How to Measure
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.
Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.
To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).
Option 2: Gate mounted between existing posts/ pillars.
To calculate gate width: Take the lowest measurement and reduce by 150mm (6″).
Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.
Estimated Delivery Time: Monday 10th June to Friday 14th June.
FREE UK (mainland) delivery on orders over £750. Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
Description
Our “Prestige” gate range. Combining the strength and durability of deep metal frames with the natural beauty of hand selected timber infill to create a truly elegant gate, that really does “make an entrance”.
Constructed using Iroko (hardwood) – a naturally aesthetically pleasing wood. Expertly crafted by hand to any size in the UK. First by our skilled fabricators then to our experienced joiners for infill. Our metal framed gate range is what we are most proud of. Attention to detail both for look and durability is paramount. Sturdy 40mm x 40mm premium frame work, smooth welded joints, solid 30mm x 15mm rear bracing bars and stainless steel screws to fix the timber into place. To help prevent the gate from twisting or warping, welded braces are placed throughout the rear of the gate to ensure the cladding is correctly fixed. As timber is a natural product, it is prone to move during the seasons – in fact, a single piece of cladding can swell or contract up to 1.5mm, therefore, unlike others, we predict this movement and all gates are produced with a (non see through) expansion gap allowing the gate to “breathe” without anyone noticing it. The gap is dependant on gate size, and is usually between 5mm and 15mm which runs along the frame, parallel to the cladding width. This ensures stability of the gate without compromising the look.
Available Sizes:
- Width: from 6ft (each side 3ft) to a massive 20ft (each side 10ft)
- Height: from 4ft to 7ft – taken to the highest point of the gate.
- Made to Measure – all gates online can be purchased to the nearest inch, if you do require a more precise size, please contact us. (Unlike others – there is NO additional cost for bespoke, we simply base price on the next size!).
Gate Furniture:
- Included FREE of charge: 4 x Adjustable hinges (and hinge pins), stainless steel handle and lock providing ultimate protection for your home. 2 x drop bolts. As standard, the position of the hinge pin will be 6″ (150mm) from top and bottom of the gate. If you require these at a different measurement (for example, pins already set in pillars), please call to order.
Finish:
- As standard, the framework will be finished in black, anthracite grey or white (included in price) with optional finish to choose from for timber. We can also supply the frame in any RAL colour if needed.
Posts:
- Due to the weight of these gates. We only recommend “below ground” posts for support or install to existing pillars (as long as the pillar is structurally sound).
METAL FRAMED DRIVEWAY GATES
The Beauty of Iroko with Metal
Combining a deep metal frame with stunning Iroko timber to produce a long lasting and aesthetically pleasing driveway gate.
Iroko hardwood timber comes from the Milicia excelsa tree and is commonly known for it's warm and attractive appearance. Featuring a golden to dark brown color with interlocked grain patterns. As it ages, it tends to darken, developing a rich patina that adds to its aesthetic appeal.
With natural weather-resistant properties, which make it ideal for outdoor use. It can withstand exposure to different weather conditions, including rain, sun, and humidity, without significant deterioration. This makes it a preferred material for outdoor gates.
Overall, Iroko hardwood timber's beauty and benefits make it a popular choice for a variety of applications where strength, durability, and an appealing aesthetic are essential considerations.
Iroko is a strong and dense hardwood, making it suitable for heavy-duty applications. Its strength is comparable to teak, making it a reliable choice for construction and woodworking projects that require robust materials.
METAL FRAMED DRIVEWAY GATES
The Beauty of Iroko
Iroko hardwood timber comes from the Milicia excelsa tree and is commonly known for it's warm and attractive appearance. Featuring a golden to dark brown color with interlocked grain patterns. As it ages, it tends to darken, developing a rich patina that adds to its aesthetic appeal.
With natural weather-resistant properties, which make it ideal for outdoor use. It can withstand exposure to different weather conditions, including rain, sun, and humidity, without significant deterioration. This makes it a preferred material for outdoor gates.
Overall, Iroko hardwood timber's beauty and benefits make it a popular choice for a variety of applications where strength, durability, and an appealing aesthetic are essential considerations.
Iroko is a strong and dense hardwood, making it suitable for heavy-duty applications. Its strength is comparable to teak, making it a reliable choice for construction and woodworking projects that require robust materials.
DRIVEWAY GATES
How to Measure
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.
Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.
To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).
Option 2: Gate mounted between existing posts/ pillars.
To calculate gate width: Take the lowest measurement and reduce by 150mm (6″).
Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.
INCLUDED WITH YOUR GATE
Added Security
Fully fitted Locinox 40 security handle and lock system. Supplied with 3 keys and available in black or chrome.
Insert Lock with 100% stainless steel mechanism. The Stainless steel and adjustable self-latching bolt combined with the right keep guarantee a strong and solid closed gate where the gate wings can not be pulled apart or forced open.
- Lock mechanism with cover plate against dirt penetration
- Patented "Click-It" system makes tapping tread in the profile unnecessary
- Key-operated self-latching bolt
- Mechanism, hook, frontplate, latchbolt: stainless steel
- Easy left or right changing of the self-latching daybolt
- Stainless steel hook for secure anchoring
- Compatible with all Europrofile cylinders
Really "make an entrance!" - Latest customer images
What our customers think
Start typing to see products you are looking for.
Reviews
Clear filtersThere are no reviews yet.