KENSINGTON METAL GARDEN GATE:
One of our modern design, “Premium Frame” garden gates constructed using a deep 40mm x 40mm box frame. This creates a stunning looking gate that will last for many years. Handcrafted in the UK by skilled craftsmen using the finest materials to provide ultimate durability and quality. Unlike our competitors, our gate material is thicker, comes complete with a 10 year workmanship guarantee, adjustable hinges/ pins, opening latch. Therefore, if fitting to existing posts/ pillars – this gate is ready to hang with no extras required.
How to Measure: Take three measurements (top, middle and bottom) horizontally between the pillars. Reduce size by 4″ (100mm). The size you end up with is the gate width required.
Width of Gate: Taken as the actual gate (not opening size). This can be easily calculated – measure the distance between the pillars and reduce by 100mm (4″).
Height of Gate: Taken to the highest point of each gate. We recommend allowing a 50mm (2″) clearance between the bottom edge of gate and driveway (as long as the drive is level). If you require a more exact height, please contact us to order. Garden gates available to 4ft 6″. Need a taller gate? See Metal Side Gates.
Gate Furniture (hinges etc): 2 x adjustable hinges, hinge pins, closing receiver and opening latch included with each gate (enough to hang direct on existing posts/ pillars). As standard, the position of the hinge will be 6″ (150mm) from the bottom edge of gate and 6″ (150mm) from top edge of gate. If you require these to be different (if for example you already have pins set into a post/ pillar), please call us.
Metal Gate Posts: 80mm x 80mm. Supplied to allow the posts to sit in the ground to a recommended depth of 2ft or above ground posts designed to be mounted against an existing pillar or wall.
Size of Gate not listed? No problem, call us with your exact size.