£770.00
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option. Gate hinges are mounted to the rear of post. A gap of 15mm between edge of gap and post (each side) and a centre gap of 10mm for opening/ closing.
Reduce 40mm off your smallest measurement (from “Step 1”).
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order – 0800 6124 965.
Estimated delivery time: Monday 4th November to Friday 8th November. (Additional 5 - 10 working days if paint/ stain is added.)
Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.
FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
£770.00
The Torbay Driveway Gate featuring a double swan header design with open spindles. Handcrafted using only the finest sourced slow grown redwood pine, all PEFC certified or FSC sourced.
Please note: Minimum height of this gate needs to be 4ft 6″ at centre.
Estimated delivery time: Monday 4th November to Friday 8th November. (Additional 5 - 10 working days if paint/ stain is added.)
Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.
FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
£770.00
The Torbay Driveway Gate featuring a double swan header design with open spindles. Handcrafted using only the finest sourced slow grown redwood pine, all PEFC certified or FSC sourced.
Please note: Minimum height of this gate needs to be 4ft 6″ at centre.
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option. Gate hinges are mounted to the rear of post. A gap of 15mm between edge of gap and post (each side) and a centre gap of 10mm for opening/ closing.
Reduce 40mm off your smallest measurement (from “Step 1”).
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order – 0800 6124 965.
Estimated delivery time: Monday 4th November to Friday 8th November. (Additional 5 - 10 working days if paint/ stain is added.)
Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.
FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
All of our gates are expertly crafted by hand in the UK using time served construction techniques. Unlike others, we do not pin our gates together. We use a traditional framing method. Mortise and tenon joints, along with dowels, are a traditional woodworking technique that provide strong and durable connections between frame members. Combining these joints in a wooden frame enhances stability and longevity. When it comes to securing the cladding to the frame, we only use stainless steel screws. Standard screws will rust leading to the gate's structure to fail over time. Hardwood is a lot more of a stable timber compared to softwood but will expand and shrink during different stages throughout the year. This is completely normal. To protect this, we rebate the inner legs of the gate. This allows the cladding to expand and contract without causing any damage to the frame and without it being noticeable when looking at the gate.
Finish is in the detail. Routered detailing to the edges of the gate, creating a more polished and refined appearance. This decorative touch enhances the overall visual appeal of the gate, making it stand out as a well-crafted and finished piece.
We welcome and encourage our customers to come and visit our factory and see gates being produced for themselves.
| FRAMED | 3" x 3" (70mm x 70mm) - Mortise, tennon & dowel jointed |
| REAR BRACING | 3" x 2" (70mm x 47mm) |
| CLADDING | T, G and V, 19mm Deep x 125mm Wide (nominal) |
| FIXINGS | Stainless Steel Screws |
Redwood pine is known for its stunning natural beauty. It has a rich, warm color with prominent grain patterns that add elegance and charm to any gate. Its aesthetic appeal often enhances the overall look of the property. It is a durable wood, especially when properly treated and maintained. It has natural resistance to decay, rot, and insect damage, making it ideal for outdoor applications such as gates. With the right finish and care, a redwood pine gate can last for many years.
Redwood pine is a sustainable option. It is harvested from responsibly managed forests, ensuring that new trees are planted to replace those used. Choosing redwood pine for your gate helps support sustainable forestry practices.
Redwood pine is known for its stunning natural beauty. It has a rich, warm color with prominent grain patterns that add elegance and charm to any gate. Its aesthetic appeal often enhances the overall look of the property. It is a durable wood, especially when properly treated and maintained. It has natural resistance to decay, rot, and insect damage, making it ideal for outdoor applications such as gates. With the right finish and care, a redwood pine gate can last for many years.
Redwood pine is a sustainable option. It is harvested from responsibly managed forests, ensuring that new trees are planted to replace those used. Choosing redwood pine for your gate helps support sustainable forestry practices.
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option. Gate hinges are mounted to the rear of post. A gap of 15mm between edge of gap and post (each side) and a centre gap of 10mm for opening/ closing.
Reduce 40mm off your smallest measurement (from "Step 1").
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.
Professionally applied. We offer a range of finish options for your gate. Clear oil, standard range of paint colours:
Have it your way. Match your home, any RAL colour finish is available.
Available in either galvanised or galvanised and black finish. Heavy duty adjustable gate hinge set which includes:
For gates over 10ft wide, we recommend our 36" adjustable set.
All hinge sets come with a 5 yr guarantee.
Custom engraving. Add your house name, number and road name etc.
Only available on flat top gates.
Add some power!
Add some power!
Above ground kit or below ground kit available. All systems are backed with a manufacturer warranty.
If you are thinking of adding automation to your gate in the future, order your gate with the centre rail, automation ready.
Sally W –
Pictures do not do this gate justice. It’s a stunning gate that looks like it’s been lovingly crafted. Had so many compliments from our neighbours. Very happy with our decision.
D Micheals –
The craftsmanship of the double wood gate is impressive. The wood used is of high quality, and the construction is robust. The attention to detail, from the alignment of the planks to the joints, reflects a commitment to durability and longevity.