TV icon

AS SEEN ON TV

BBC One and ITV

Gates-and-Fences-UK-Reviews

TRUSTPILOT

Our customers love us

Driveway-Gate-Manufacturer-Icon-60-1

OVER 100,000 SOLD

UK’s largest bespoke gate manufacturer

Delivery Truck

FREE UK DELIVERY

On orders over £750

Pine Garage Door Side Hinged, The Derby

£839.00

  • *DOOR WIDTH

    Total width for both doors together. For example, if you selected 8ft as the width, you would receive 2x garage doors at 4ft wide.

    *DOOR HEIGHT

    FRAME

    Two sides and top piece. Mortise and tenon jointed. 3" x 3" (68mm x 68mm) PAR timber - matches garage door.

    *Open outwards (towards driveway) or inwards (towards garage)


    For us to determine the closing rebate position.

    If stood in the garage and looking towards your driveway, which side will open first?

    FINISH

    Professionally finished. Please note. Colour may look slightly different on the gate due to screen settings. Knots on the timber and screws will be visible. We do offer free samples on request. To order your free sample, please contact us.

    *ENTER RAL COLOUR CODE

    HINGE SET

    Complete side gate hinge sets which include 2 x hinges, ring latch, brenton bolt and fixings. 5 yr guarantee.


How to Measure

INFORMATION

How to Measure

Measuring for your new garage door is actually a very simple process.

  Use a tape measure to measure the Garage Door’s opening from side to side near the floor of the garage. Measuring large dimensions of a Garage Door can be very tricky for one person. Ask a friend to help you hold one end of the measuring tape. Record this first measurement and all subsequent measurements on a piece of paper.

Measure the door’s opening from side to side again, this time near the topmost part of the Garage opening. Measuring both top and bottom width-wise dimensions will let you know if the door warped—if you get two differing dimensions at each point, then your door’s opening is slanted or bent, and you should hire a contractor to fix the problem.

How to measure garage doors

Stand on a stepladder and measure the Garage Door’s opening from top to bottom. For this measurement, you can take advantage of gravity, letting the tape measure fall to the ground for easy measurement. However, you’ll still want a friend handy to hold the stepladder for safety purposes. With this lengthwise measurement and your previous width-wise measurements, you’ll know how large the opening is for vehicle and door replacement purposes. However, additional measurements are also useful.

Once you have worked out the area, the gap now needs to be reduced to allow for opening clearances. These are as follows:

Reduce Width by 15mm – allows 5mm per side and also 5mm for centre.
Reduce Height by 20mm  – allows 5mm at top and 15mm at bottom.

 

WITH NEW REBATED FRAME

If you are putting in a new rebated frame purchased from us, take opening between walls and reduce width by 105mm.

For height, take total height and reduce by 65mm (44mm frame, 5mm top and 15mm bottom clearance.

This will be your garage door width.

Estimated delivery time: Monday 2nd December to Friday 6th December. (Additional 5 - 10 working days if paint/ stain is added.)

Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Pine Garage Door Side Hinged, The Derby

£839.00

The Derby: Finest quality Double Garage Door. Handcrafted using solid Pine tongue and grooved boards with structural frames, rear braced and mortise, tenon and dowel jointed. Our doors are constructed to last.

Also available in hardwood.

  • *DOOR WIDTH

    Total width for both doors together. For example, if you selected 8ft as the width, you would receive 2x garage doors at 4ft wide.

    *DOOR HEIGHT

    FRAME

    Two sides and top piece. Mortise and tenon jointed. 3" x 3" (68mm x 68mm) PAR timber - matches garage door.

    *Open outwards (towards driveway) or inwards (towards garage)


    For us to determine the closing rebate position.

    If stood in the garage and looking towards your driveway, which side will open first?

    FINISH

    Professionally finished. Please note. Colour may look slightly different on the gate due to screen settings. Knots on the timber and screws will be visible. We do offer free samples on request. To order your free sample, please contact us.

    *ENTER RAL COLOUR CODE

    HINGE SET

    Complete side gate hinge sets which include 2 x hinges, ring latch, brenton bolt and fixings. 5 yr guarantee.


Estimated delivery time: Monday 2nd December to Friday 6th December. (Additional 5 - 10 working days if paint/ stain is added.)

Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Pine Garage Door Side Hinged, The Derby

£839.00

  • Expertly crafted by hand in the UK
  • Made to any size
  • Mortise, tenon and dowel jointed
  • Stainless steel fixings
  • Routered edging
  • Rebated frame
  • Free UK delivery (over £750)
  • 0% Finance available

The Derby: Finest quality Double Garage Door. Handcrafted using solid Pine tongue and grooved boards with structural frames, rear braced and mortise, tenon and dowel jointed. Our doors are constructed to last.

Also available in hardwood.

  • *DOOR WIDTH

    Total width for both doors together. For example, if you selected 8ft as the width, you would receive 2x garage doors at 4ft wide.

    *DOOR HEIGHT

    FRAME

    Two sides and top piece. Mortise and tenon jointed. 3" x 3" (68mm x 68mm) PAR timber - matches garage door.

    *Open outwards (towards driveway) or inwards (towards garage)


    For us to determine the closing rebate position.

    If stood in the garage and looking towards your driveway, which side will open first?

    FINISH

    Professionally finished. Please note. Colour may look slightly different on the gate due to screen settings. Knots on the timber and screws will be visible. We do offer free samples on request. To order your free sample, please contact us.

    *ENTER RAL COLOUR CODE

    HINGE SET

    Complete side gate hinge sets which include 2 x hinges, ring latch, brenton bolt and fixings. 5 yr guarantee.


How to Measure

INFORMATION

How to Measure

Measuring for your new garage door is actually a very simple process.

  Use a tape measure to measure the Garage Door’s opening from side to side near the floor of the garage. Measuring large dimensions of a Garage Door can be very tricky for one person. Ask a friend to help you hold one end of the measuring tape. Record this first measurement and all subsequent measurements on a piece of paper.

Measure the door’s opening from side to side again, this time near the topmost part of the Garage opening. Measuring both top and bottom width-wise dimensions will let you know if the door warped—if you get two differing dimensions at each point, then your door’s opening is slanted or bent, and you should hire a contractor to fix the problem.

How to measure garage doors

Stand on a stepladder and measure the Garage Door’s opening from top to bottom. For this measurement, you can take advantage of gravity, letting the tape measure fall to the ground for easy measurement. However, you’ll still want a friend handy to hold the stepladder for safety purposes. With this lengthwise measurement and your previous width-wise measurements, you’ll know how large the opening is for vehicle and door replacement purposes. However, additional measurements are also useful.

Once you have worked out the area, the gap now needs to be reduced to allow for opening clearances. These are as follows:

Reduce Width by 15mm – allows 5mm per side and also 5mm for centre.
Reduce Height by 20mm  – allows 5mm at top and 15mm at bottom.

 

WITH NEW REBATED FRAME

If you are putting in a new rebated frame purchased from us, take opening between walls and reduce width by 105mm.

For height, take total height and reduce by 65mm (44mm frame, 5mm top and 15mm bottom clearance.

This will be your garage door width.

Estimated delivery time: Monday 2nd December to Friday 6th December. (Additional 5 - 10 working days if paint/ stain is added.)

Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

MADE IN THE UK

Expertly Crafted by Hand

All of our garage doors are expertly crafted by hand in the UK using time served construction techniques. Unlike others, we do not pin our garage doors together. We use a traditional framing method. Mortise and tenon joints, along with dowels, are a traditional woodworking technique that provide strong and durable connections between frame members. Combining these joints in a wooden frame enhances stability and longevity. When it comes to securing the cladding to the frame, we only use stainless steel screws. Standard screws will rust leading to the gate's structure to fail over time. Hardwood is a lot more of a stable timber compared to softwood but will expand and shrink during different stages throughout the year. This is completely normal. To protect this, we rebate the inner legs of the gate. This allows the cladding to expand and contract without causing any damage to the frame and without it being noticeable.

Finish is in the detail. Routered detailing to the edges of the door, creating a more polished and refined appearance. This decorative touch enhances the overall visual appeal of the door, making it stand out as a well-crafted and finished piece.

We welcome and encourage our customers to come and visit our factory and see gates being produced for themselves.

TIMBER Slow grown Redwood Pine
FRAMED 4" x 2" (94mm x 44mm) - Mortise, tennon & dowel jointed
REAR BRACING 4" x 1" (94mm x 20mm)
CLADDING T, G and V, 19mm Deep x 125mm Wide (nominal) or 12mm Marine Ply 
FIXINGS Stainless Steel Screws
FRAME (optional extra) 68mm x 68mm Rebated
Mortise-tenon-and-dowel-jointed-frame a
measuring-tape

Made to Measure

Mortice tenon

Mortise, Tenon & Dowel Joints

Rebated Frame

Stainless Steel Screws

Routered Edging

Routered Edging

Made in the UK

Made in the UK

measuring-tape

Made to Measure

Stainless Steel Screws

Mortice tenon

Mortise, Tenon & Dowel Joints

Routered Edging

Routered Edging

Rebated Frame

Made in the UK

Made in the UK

GARAGE DOORS

How to Measure

How to measure garage doors

Measuring for your new gate is actually a very simple process.

  Use a tape measure to measure the Garage Door’s opening from side to side near the floor of the garage. Measuring large dimensions of a Garage Door can be very tricky for one person. Ask a friend to help you hold one end of the measuring tape. Record this first measurement and all subsequent measurements on a piece of paper.

Measure the door’s opening from side to side again, this time near the topmost part of the Garage opening. Measuring both top and bottom width-wise dimensions will let you know if the door warped—if you get two differing dimensions at each point, then your door’s opening is slanted or bent, and you should hire a contractor to fix the problem.

  Stand on a stepladder and measure the Garage Door’s opening from top to bottom. For this measurement, you can take advantage of gravity, letting the tape measure fall to the ground for easy measurement. However, you’ll still want a friend handy to hold the stepladder for safety purposes. With this lengthwise measurement and your previous width-wise measurements, you’ll know how large the opening is for vehicle and door replacement purposes. However, additional measurements are also useful.

Once you have worked out the area, the gap now needs to be reduced to allow for opening clearances. These are as follows:

Reduce Width by 15mm: allows 5mm per side and also 5mm for centre.
Reduce Height by 20mm: allows 5mm at top and 15mm at bottom.

WITH NEW REBATED FRAME

If you are putting in a new rebated frame purchased from us, take opening between walls and reduce width by 105mm.

For height, take total height and reduce by 65mm (44mm frame, 5mm top and 15mm bottom clearance.

This will be your garage door width.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Pine Garage Door Side Hinged, The Derby”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Really "make an entrance!" - Latest customer images

What our customers think