TV icon

AS SEEN ON TV

BBC One and ITV

Gates-and-Fences-UK-Reviews

TRUSTPILOT

Our customers love us

Driveway-Gate-Manufacturer-Icon-60-1

OVER 100,000 SOLD

UK’s largest bespoke gate manufacturer

Delivery Truck

FREE UK DELIVERY

On orders over £750

Redhill Side Gate

£385.00

  • *WIDTH

    This is the actual width the gate will arrive. To calculate, take three horizontal measurements between existing posts/ pillars. Reduce measurement by 20mm (4/5") to allow for hinge and opening clearance.

    *GATE HEIGHT

    Taken to the highest point of the gate.

    *SELECT HINGE SIDE

    Looking towards the rear of the gate, would the hinges be on the left or right hand side? 


    *HORN DESIGN

    Change the horn design on the sides of gate. 

    FINISH OPTIONS

    Professionally finished. Please note. Colour may look slightly different on the gate due to screen settings. Knots on the timber and screws will be visible. We do offer free samples on request. To order your free sample, please contact us.

    *ENTER RAL COLOUR CODE

    HINGE SET

    Complete side gate hinge sets which include 2 x hinges, ring latch, brenton bolt and fixings. 5 yr guarantee.

    KEYED LOCKS

    POSTS

    All posts are 8ft (2m 440mm) in length. Sold online in pairs. If you require single posts, please call to order.

  • Add your house name or house number and road name to your gate. Engraved into the top section rail of the gate.

    *Enter numbers/ wording

  • Add automation to your pedestrian/ side gate. Neatly mounted to the top corner of the gate. Provides easy access to your area with the benefit of adding additional security when used with an electronic mag lock. 24v system capable of opening gates up to 1.2m (4ft) wide - call to order if over 1.2m wide)

    Please note: No handles/ locks are needed if adding automation so will therefore not be included.

    Download Manual

    OTHER CUSTOMERS ALSO PURCHASED

    * 

How to Measure

GARDEN & SIDE GATES

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

How-to-measure-garden gate-width

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 68mm wide each) = 1m 124mm.

  Reduce the opening width by 20mm. This allows for a gap of 10mm either side for clearance.

Calculate-width-of-wooden-garden-gates

Take measurement from "Step 1" and reduce by 20mm. This is the actual gate size you need to order.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

Estimated delivery time: Monday 2nd December to Friday 6th December. (Additional 5 - 10 working days if paint/ stain is added.)

Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Redhill Side Gate

£385.00

Stunning, hand-crafted Side Gates manufactured from the finest quality, slow grown European Redwood Pine. Combining traditional, time served construction techniques such as Mortise, Tenon & Dowel Joints alongside thick frame, deep cladding and rear structural bracing our Gates really are built for strength and durability.

  • *WIDTH

    This is the actual width the gate will arrive. To calculate, take three horizontal measurements between existing posts/ pillars. Reduce measurement by 20mm (4/5") to allow for hinge and opening clearance.

    *GATE HEIGHT

    Taken to the highest point of the gate.

    *SELECT HINGE SIDE

    Looking towards the rear of the gate, would the hinges be on the left or right hand side? 


    *HORN DESIGN

    Change the horn design on the sides of gate. 

    FINISH OPTIONS

    Professionally finished. Please note. Colour may look slightly different on the gate due to screen settings. Knots on the timber and screws will be visible. We do offer free samples on request. To order your free sample, please contact us.

    *ENTER RAL COLOUR CODE

    HINGE SET

    Complete side gate hinge sets which include 2 x hinges, ring latch, brenton bolt and fixings. 5 yr guarantee.

    KEYED LOCKS

    POSTS

    All posts are 8ft (2m 440mm) in length. Sold online in pairs. If you require single posts, please call to order.

  • Add your house name or house number and road name to your gate. Engraved into the top section rail of the gate.

    *Enter numbers/ wording

  • Add automation to your pedestrian/ side gate. Neatly mounted to the top corner of the gate. Provides easy access to your area with the benefit of adding additional security when used with an electronic mag lock. 24v system capable of opening gates up to 1.2m (4ft) wide - call to order if over 1.2m wide)

    Please note: No handles/ locks are needed if adding automation so will therefore not be included.

    Download Manual

    OTHER CUSTOMERS ALSO PURCHASED

    * 

Estimated delivery time: Monday 2nd December to Friday 6th December. (Additional 5 - 10 working days if paint/ stain is added.)

Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Redhill Side Gate

£385.00

  • Expertly crafted by hand in the UK
  • Made to any size
  • Mortise, tenon and dowel jointed
  • Stainless steel fixings
  • Routered edging
  • Rebated frame
  • Free UK delivery (over £750)
  • 0% Finance available

Stunning, hand-crafted Side Gates manufactured from the finest quality, slow grown European Redwood Pine. Combining traditional, time served construction techniques such as Mortise, Tenon & Dowel Joints alongside thick frame, deep cladding and rear structural bracing our Gates really are built for strength and durability.

  • *WIDTH

    This is the actual width the gate will arrive. To calculate, take three horizontal measurements between existing posts/ pillars. Reduce measurement by 20mm (4/5") to allow for hinge and opening clearance.

    *GATE HEIGHT

    Taken to the highest point of the gate.

    *SELECT HINGE SIDE

    Looking towards the rear of the gate, would the hinges be on the left or right hand side? 


    *HORN DESIGN

    Change the horn design on the sides of gate. 

    FINISH OPTIONS

    Professionally finished. Please note. Colour may look slightly different on the gate due to screen settings. Knots on the timber and screws will be visible. We do offer free samples on request. To order your free sample, please contact us.

    *ENTER RAL COLOUR CODE

    HINGE SET

    Complete side gate hinge sets which include 2 x hinges, ring latch, brenton bolt and fixings. 5 yr guarantee.

    KEYED LOCKS

    POSTS

    All posts are 8ft (2m 440mm) in length. Sold online in pairs. If you require single posts, please call to order.

  • Add your house name or house number and road name to your gate. Engraved into the top section rail of the gate.

    *Enter numbers/ wording

  • Add automation to your pedestrian/ side gate. Neatly mounted to the top corner of the gate. Provides easy access to your area with the benefit of adding additional security when used with an electronic mag lock. 24v system capable of opening gates up to 1.2m (4ft) wide - call to order if over 1.2m wide)

    Please note: No handles/ locks are needed if adding automation so will therefore not be included.

    Download Manual

    OTHER CUSTOMERS ALSO PURCHASED

    * 

How to Measure

GARDEN & SIDE GATES

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

How-to-measure-garden gate-width

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 68mm wide each) = 1m 124mm.

  Reduce the opening width by 20mm. This allows for a gap of 10mm either side for clearance.

Calculate-width-of-wooden-garden-gates

Take measurement from "Step 1" and reduce by 20mm. This is the actual gate size you need to order.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

Estimated delivery time: Monday 2nd December to Friday 6th December. (Additional 5 - 10 working days if paint/ stain is added.)

Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

MADE IN THE UK

Expertly Crafted by Hand

All of our gates are expertly crafted by hand in the UK using time served construction techniques. Unlike others, we do not pin our gates together. We use a traditional framing method. Mortise and tenon joints, along with dowels, are a traditional woodworking technique that provide strong and durable connections between frame members. Combining these joints in a wooden frame enhances stability and longevity. When it comes to securing the cladding to the frame, we only use stainless steel screws. Standard screws will rust leading to the gate's structure to fail over time. Hardwood is a lot more of a stable timber compared to softwood but will expand and shrink during different stages throughout the year. This is completely normal. To protect this, we rebate the inner legs of the gate. This allows the cladding to expand and contract without causing any damage to the frame and without it being noticeable when looking at the gate.

Finish is in the detail. Routered detailing to the edges of the gate, creating a more polished and refined appearance. This decorative touch enhances the overall visual appeal of the gate, making it stand out as a well-crafted and finished piece.

We welcome and encourage our customers to come and visit our factory and see gates being produced for themselves.

FRAMED 3" x 3" (70mm x 70mm) - Mortise, tennon & dowel jointed
REAR BRACING 3" x 2" (70mm x 47mm)
CLADDING T, G and V, 19mm Deep x 125mm Wide (nominal)
FIXINGS Stainless Steel Screws
Mortise-tenon-and-dowel-jointed-frame
measuring-tape

Made to Measure

Mortice tenon

Mortise, Tenon & Dowel Joints

Rebated Frame

Stainless Steel Screws

Routered Edging

Routered Edging

Made in the UK

Made in the UK

measuring-tape

Made to Measure

Stainless Steel Screws

Mortice tenon

Mortise, Tenon & Dowel Joints

Routered Edging

Routered Edging

Rebated Frame

Made in the UK

Made in the UK

SOFTWOOD DRIVEWAY GATES

The Beauty of Redwood Pine

Redwood pine is known for its stunning natural beauty. It has a rich, warm color with prominent grain patterns that add elegance and charm to any gate. Its aesthetic appeal often enhances the overall look of the property. It is a durable wood, especially when properly treated and maintained. It has natural resistance to decay, rot, and insect damage, making it ideal for outdoor applications such as gates. With the right finish and care, a redwood pine gate can last for many years.

ENVIRONMENTAL BENEFITS

Redwood pine is a sustainable option. It is harvested from responsibly managed forests, ensuring that new trees are planted to replace those used. Choosing redwood pine for your gate helps support sustainable forestry practices.

SOFTWOOD DRIVEWAY GATES

The Beauty of Redwood Pine

Redwood pine is known for its stunning natural beauty. It has a rich, warm color with prominent grain patterns that add elegance and charm to any gate. Its aesthetic appeal often enhances the overall look of the property. It is a durable wood, especially when properly treated and maintained. It has natural resistance to decay, rot, and insect damage, making it ideal for outdoor applications such as gates. With the right finish and care, a redwood pine gate can last for many years.

ENVIRONMENTAL BENEFITS

Redwood pine is a sustainable option. It is harvested from responsibly managed forests, ensuring that new trees are planted to replace those used. Choosing redwood pine for your gate helps support sustainable forestry practices.

GARDEN & SIDE GATES

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

How-to-measure-garden gate-width

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 68mm wide each) = 1m 124mm.

  Reduce the opening width by 20mm. This allows for a gap of 10mm either side for clearance.

Calculate-width-of-wooden-garden-gates

Take measurement from "Step 1" and reduce by 20mm. This is the actual gate size you need to order.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

GATES AND FENCES UK

Optional Extras

Your Gate...Your Colour

Professionally applied. We offer a range of finish options for your gate. Clear oil, standard range of paint colours:

  • White
  • Anthracite Grey
  • Black
  • Rosewood
  • Grey/ Blue
  • Chartwell Green
  • Pebble grey

Have it your way. Match your home, any RAL colour finish is available.

Your gate - your colour 2
Gate_Hinge_Tee_Set_GandF

Side Gate Hinges

Available in either galvanised or galvanised and black finish. Heavy duty adjustable gate hinge set which includes:

  • 2x Hinges
  • Brenton bolt
  • Opening Latch
  • Fixings (for gate only)

All hinge sets come with a 5 yr guarantee.

Engraving

Custom engraving. Add your house name, number and road name etc.

Only available on flat top gates.

Engraving on gates
e5-bt-a - Automated Pedestrian Gate 300

Gate Automation

Add some power!

Automate your pedestrian gate with a BFT E5 operator. Designed to be used and mounted on the top of the gate. The BFT E5 is an extremely compact non-locking 24V electromechanical operator with articulated arm for pedestrian swing gates.

There are two models available, the A12 and A18. The A12 model is suitable leafs up to 1.2 metres wide and up to 80kg and the A18 model is suitable for 1.8 metres wide and up to 100kg.

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Redhill Side Gate”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Really "make an entrance!" - Latest customer images

What our customers think