Measuring for your new gate is actually a very simple process.
Take three horizontal measurements between existing posts/ pillars – top, middle and bottom.
Sliding Gate Kit
SLIDING GATES
How to Measure
Take the largest of the three widths and order this size.
We add the additional section of the gate on top of this to allow for the cantilever (usually 800mm).
Estimated Delivery Time: Monday 27th May to Friday 31st May.
FREE UK (mainland) delivery on orders over £750. Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
Sliding Gate Kit
Sliding gate kit for metal framed/ wrought iron gate. After years of experience and research, we recommend (and use) this set up for sliding gates. Eliminates any additional fabrication/ welding that may otherwise be required.
Included:
- 2x Metal Receiving Posts: 4″ x 4″ (100mm x 100mm) 8ft long (2m 400mm). Both have (2x) pre fabricated gate catches attached. Length of 8ft to allow fitment underground.
- 1 x Support Post: with arm and 2x nylon rollers
- Ground Track (length depends on size selected)
- “U” Rail – 4m (if purchasing without a gate, please call if you prefer this cut to the exact size of gate width).
- Wheels x2
Estimated Delivery Time: Monday 27th May to Friday 31st May.
FREE UK (mainland) delivery on orders over £750. Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
Sliding Gate Kit
-
Eco-Friendly
-
95% Recycled Materials
-
"UltraSheild" Technology
-
Advanced UV Protection
-
Made to Measure
-
Free Nationwide Delivery
-
Expertly Crafted in the UK
-
0% Finance Available
SLIDING GATES
How to Measure
Measuring for your new gate is actually a very simple process.
Take three horizontal measurements between existing posts/ pillars – top, middle and bottom.
Take the largest of the three widths and order this size.
We add the additional section of the gate on top of this to allow for the cantilever (usually 800mm).
Estimated delivery time: Monday 13th May to Friday 17th May. (Additional 5 - 10 working days if paint/ stain is added.)
Need it faster? Call our team on 0800 6124 965 to discuss our EXPRESS SERVICE.
FREE UK (mainland) delivery on orders over £750. Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
Sliding gate kit for metal framed/ wrought iron gate. After years of experience and research, we recommend (and use) this set up for sliding gates. Eliminates any additional fabrication/ welding that may otherwise be required.
Included:
- 2x Metal Receiving Posts: 4″ x 4″ (100mm x 100mm) 8ft long (2m 400mm). Both have (2x) pre fabricated gate catches attached. Length of 8ft to allow fitment underground.
- 1 x Support Post: with arm and 2x nylon rollers
- Ground Track (length depends on size selected)
- “U” Rail – 4m (if purchasing without a gate, please call if you prefer this cut to the exact size of gate width).
- Wheels x2
Frequently Asked Questions
How to Measure
SLIDING GATES
How to Measure
Measuring for your new gate is actually a very simple process.
Take three horizontal measurements between existing posts/ pillars – top, middle and bottom.
Take the largest of the three widths and order this size.
We add the additional section of the gate on top of this to allow for the cantilever (usually 800mm).
Specification
Produced using our “Premium” frame system. The depth, thickness and quality of materials used in the construction of metal framed composite gates is a key factor on how the gate will look and perform. We only use the finest steel that’s thicker than many of our competitors. This ultimately produces a long lasting gate that really does “make an entrance”.
| GATE MATERIAL | Composite and Metal |
| FRAME | 50mm x 50mm |
| REAR BRACING | 30mm x 15mm Structural Bars |
| COMPOSITE | 95% Recycled Materials – UltraShield |
| BOTTOM RAIL | 100mm x 50mm |
| BOARD SIZE | Depth 21mm x 139mm |
| HANDCRAFTED | Made in the UK |
| SIZE | Bespoke Available |
Delivery
Estimated Delivery Time: Monday 27th May to Friday 31st May.
FREE UK (mainland) delivery on orders over £750. Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
What's included with the gate?
This gate comes complete with:
- Choice of frame colour: Black, Anthracite Grey or White (any RAL available at additional charge)
- Composite: Anthracite Grey, Walnut, Teak, Light Grey (stone), Ebony (black) or Antique.
We recommend adding “Sliding Gate Kit” for manual or automated sliding gates.
How do I maintain the gate?
Easily! Simply wash your composite gate down with warm, soapy water and rinse off. Any chips to the frame can be touched up using a paint pen.
Composite gates are the easiest material to maintain…no need for painting or staining.
Useful Guides
COMPOSITE GATES
Composite Board Choice
We offer 5 different boards, Anthracite Grey, Light Grey (Stone), Teak, Antique or Walnut. The board is capped 360 degrees which will give the board maximum protection against mold/mildew, stains, fading, cracking, cupping, and swelling.
To order your free samples, please see here.
Anthracite Grey
Light Grey (Stone)
Teak
Antique
Walnut
Ebony (Black)
Anthracite Grey
Light Grey (Stone)
Teak
Antique
Walnut
Ebony (Black)
COMPLETE SET UP
Sliding Gate Kit
Sliding Gate Kit: Complete sliding gate system for either manual or electric sliding gates. Finished in black (other RAL colours available – please call) and supplied with:
- 2x Metal Receiving Posts: 4″ x 4″ (100mm x 100mm) 8ft long (2m 400mm). Both have (2x) pre fabricated gate catches attached. Length of 8ft to allow fitment underground.
- 1 x Support Post: with arm and 2x nylon rollers
- 3x 3m Ground Track
- “U” Rail – 4m (if purchasing without a gate, please call if you prefer this cut to the exact size of gate width).
- Wheels x2 (minimum)
3 reviews for Sliding Gate Kit
Clear filtersReally "make an entrance!" - Latest customer images
What our customers think
Start typing to see products you are looking for.
G Bunce –
A must for any sliding gate. Couldn’t find anyone else offering a full set up like this. Nicely made.
Dave Reid –
Great – full kit, we didn’t need anything else.
James Brookes –
Exactly what we needed to make our sliding gate work! Made ordering easier as came as a complete set up. Our installers had no problem fitting this with our new gate.