TV icon

AS SEEN ON TV

BBC One and ITV

Gates-and-Fences-UK-Reviews

TRUSTPILOT

Our customers love us

Driveway-Gate-Manufacturer-Icon-60-1

OVER 100,000 SOLD

UK’s largest bespoke gate manufacturer

Delivery Truck

FREE UK DELIVERY

On orders over £750

Bath Composite 3/4 Split Gate

Original price was: £3,015.00.Current price is: £2,515.00.

  • Calculating Split Driveway Gate Size:

    Take three horizontal measurements between existing posts/ pillars – top, middle and bottom. Reduce the smallest width by 50mm (2"). Select the nearest measurement from the drop down that is smaller than your size. 

    Where-to-Measure-Driveway-Gate

    WIDTH (left side from rear)

    WIDTH (right side from rear)

    *HEIGHT

    Taken to the highest point of the gate. We recommend allowing a gap clearance of 1" (25mm).

    SELECT FINIAL

    We offer 4 different designs. Fleur De Lys, Ball Tops, Spearheads or Arrow Tops.

    *Take measurement between posts then reduce by...

    * 

    SELECT FRAME COLOUR (free with gate)

    SATIN OR MATT?

    *ENTER RAL COLOUR CODE

    Please enter RAL colour code. 

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    *SELECT HANDLE/ LOCK COLOUR (free with gate)

    METAL POSTS

    Due to the weight of the gates, we only recommend fitting below ground posts. Pyramid capped with fitted gate hanging pins attached to posts.

    Free with Gate

    Both handle and adjustable hinges included free of charge with each gate.

How to Measure

DRIVEWAY GATES

How to Measure

Measuring for your new gate is actually a very simple process.

   If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.

Make a note of the SMALLEST width.

** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 3m 460mm minus 2x posts (at 100mm wide each) = 3m 260mm.

Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.

Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.

How-to-measure-for-metal-framed-split-driveway-gates

To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).

Option 2: Gate mounted between existing posts/ pillars.

How-to-measure-for-metal-framed-split gates

To calculate gate width: Take the lowest measurement and reduce by 150mm (6″).

Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.

If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.

Estimated Delivery Time: Monday 17th February to Friday 21st February.

FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.

Need advice?

Call our team on 0800 6124 965
Monday to Friday, 9am to 5pm.

Our customers love us...

  • 0% Finance Spread the cost of your new gate interest free.
    Orders over £1000 to £6000. Option available at checkout.

Bath Composite 3/4 Split Gate

Original price was: £3,015.00.Current price is: £2,515.00.

Eco friendly composite 3/4 split driveway gate, the Bath. Constructed from 60% bamboo (FSC 100% Certified) and 40% recycled High Density Polyethylene, environmentally gentle bonding agent, additives and tint. Saving these materials from landfill, giving them value and recycling them into a long life product, provides a harmonious solution to sustainable living all set within a deep metal frame using UK steel to produce an extremely durable and low maintenance gate.

  • Calculating Split Driveway Gate Size:

    Take three horizontal measurements between existing posts/ pillars – top, middle and bottom. Reduce the smallest width by 50mm (2"). Select the nearest measurement from the drop down that is smaller than your size. 

    Where-to-Measure-Driveway-Gate

    WIDTH (left side from rear)