- Take three, horizontal measurements between existing posts/ pillars – top, middle and bottom.
- Take the smallest of the three widths and reduce as follows: (depending on gate set up)
Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).
Option 2: Gate mounted between existing posts/ pillars.
To calculate gate width: Take the lowest measurement and reduce by 150mm (6″).
For further information, please call our sales team direct on 0800 6124 965.
Download PDF Guide
Reviews
Clear filtersThere are no reviews yet.