TV icon

AS SEEN ON TV

BBC One and ITV

Gates-and-Fences-UK-Reviews

TRUSTPILOT

Our customers love us

Driveway-Gate-Manufacturer-Icon-60-1

OVER 100,000 SOLD

UK’s largest bespoke gate manufacturer

Delivery Truck

FREE UK DELIVERY

On orders over £750

-5%
Modern Metal Driveway Gate design - the Chelsea Low
On Sale
Sale!
%
Off
5
Save £34
34£
5%
34
£
Modern Metal Driveway Gate design - the Chelsea Low - rear view
Modern Metal Driveway Gate design - the Chelsea Low - closed
Metal Driveway Gates - The Chelsea Low
Metal Driveway Gates - The Chelsea Low
Click to enlarge
Modern Metal Driveway Gate design - the Chelsea Low
Modern Metal Driveway Gate design - the Chelsea Low - rear view
Modern Metal Driveway Gate design - the Chelsea Low - closed
Metal Driveway Gates - The Chelsea Low
Metal Driveway Gates - The Chelsea Low

Metal Driveway Gates – The Chelsea Low

£695.00

  • 1: SELECT GATE SIZE

    How to Measure:

    Take three measurements, top, middle and bottom. Take the shortest of the three measurements. Reduce width dependant on set-up. 50mm if hanging on rear face of post or 150mm if hanging to inner of post.

    WIDTH*

    Actual gate width for both sides added together. For example, if you selected a width from the drop down of 10ft (3m 048mm), you would receive 2 x gates at 5ft wide (1m 524mm).

    HEIGHT*

    Taken to the highest point of the gate. We recommend leaving a gap of 25mm (1") clearance between the bottom edge of the gate and ground level. 

    2: SELECT HOW GATE WILL HANG

     *

    3: SELECT FINISH

    SELECT FRAME COLOUR (free with gate)

    Please enter RAL colour code. 

    ENTER RAL COLOUR CODE*

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    ADD LONG LIFE?

    Our long life system provides the ultimate protection against rust and chips. The gates are sand blasted after production then a zinc primer is applied followed by a smoother, thicker top coat.

    4: ADD POSTS?

    METAL POSTS

    5: HINGES AND LATCH (free with gate)

    Free with Gate

    Both opening latch and adjustable hinges included free of charge with each gate.

    6: ADD AUTOMATION?

    ADDING AUTOMATION?

    Extra support for the gate is needed if planning on automating your gates. This is due to the force of the automation to the gate. Standard rails (over time) will fail. Add either a strengthened middle rail if attaching automation arms to middle of the gate (also know as above ground automation), or bottom wrap around hinges if using underground automation.

    AUTOMATION KITS

    Supplied to us by BFT, one of the most reliable automation manufacturers out there. All kits come complete with a 2 year manufacturers guarantee.

     *

Check your eligibility

Fast check - won't affect your credit rating.

Stylish and modern low height driveway gate. The Chelsea features a flat top with square insert bars to create an architectural gate design. Manufactured by hand in the UK by skilled craftsmen using the finest materials to provide ultimate durability and quality. Deep 40mm x 40mm box section with 20mm x 20mm inner box inserts. All of our gates come complete with a 10 year workmanship guarantee, adjustable hinges, latch, 2 x drop bolts.

0800 6124 965

Advice? Call our team today

Category: Tag:
Compare
Add to wishlist
  • 10 year warranty on gates 10 Year warranty on welds
  • Crafted by hand in the UK
  • Premium Frame System "Premium Frame" system
  • Metal Gate Sprayer Your gate...your colour!

Product information

Description

THE CHELSEA DRIVEWAY GATE:

Stylish and modern low height driveway gate. The Chelsea features a flat top with square insert bars to create an architectural gate design. Manufactured by hand in the UK by skilled craftsmen using the finest materials to provide ultimate durability and quality. Deep 40mm x 40mm box section with 20mm x 20mm inner box inserts. All of our gates come complete with a 10 year workmanship guarantee, adjustable hinges, latch, 2 x drop bolts.

How to Measure: Take three measurements (top, middle and bottom) horizontally between the pillars. Reduce size by 50mm (2″) if mounting hinges to back of post/ pillar or 150mm (6″) if mounting hinges to inner face of posts/ pillars. See “How to Measure” for more information

Gate Furniture Included (hinges etc): 4 x adjustable hinges, hinge pins, latch and drop bolts included with each gate. As standard, the position of the hinge will be 6″ (150mm) from the bottom edge of gate and 6″ (150mm) from top edge of gate. If you require these to be different (if for example you already have pins set into a post/ pillar), please call us.

Size of Gate not listed? No problem, call us with your exact size.

How to Measure

Calculating gate width with existing pillars or posts in place.

Take THREE measurements between the pillars/ posts. Across the top, middle and bottom. Make a note of the SMALLEST measurement.

Where to Measure Driveway Gate
 
 
How to calculate gap size on metal driveway gates

FIGURE 1:

Gates to open towards driveway. Hinge plates mounted to rear face of post/ pillar. Back edge of gate sits flush with the back edge of post/ pillar.

REDUCE 50mm (2″) from your lowest measurement.

OR

Calculate-width-of-metal-driveway-gates-2a

FIGURE 2:

Gates can open both ways. Hinge plates mounted to inner face of post/ pillar. Gate to be mounted central between the posts.

REDUCE 150mm (approx. 6″) from your lowest measurement.

If adding underground automation, reduce width by 110mm.

DOWNLOAD MEASUREMENT GUIDE
Specification

The depth, thickness and quality of materials used in the construction of metal gates is a key factor on how the gate will look and perform. We only use the finest steel that’s thicker than industry standard. This ultimately produces a long lasting gate that really does “make an entrance”.

GATE MATERIAL
HANGING STYLE 40mm x 40mm
BOTTOM & TOP RAIL 40mm x 40mm
MAIN INFILL BARS 40mm x 20mm Box
Size Guide

Width of Gate: Taken as if both sides were touching each other. For example, a width from the drop down menu of 10ft (3m 048mm) would be 2 x 5ft wide. If you are measuring a gap between existing posts/ pillars, we recommend reducing the opening size by 6″ (150mm) to allow for hinge/ pins and centre clearance.

Height of Gate: Taken to the highest point of each gate. We recommend allowing a 50mm (2″) clearance between the bottom edge of gate and driveway (as long as the drive is level). If you require a more exact height, please contact us to order.

Delivery

All products are made on order. As such, delivery times can go up and down depending on order volume. We delivery across the whole of the UK (mainland only – please call if Isle of Wight etc).

Wooden Gates (inc Garage Doors): Week commencing 8th of Janurary. (If adding a stain or paint finish, please allow a further 5 days.)

Composite Gates: Week commencing 22nd of January.

Metal and Metal Infill Gates: Week commencing 22nd of January.

Metal Railings and Ballustrades: Week commencing 22nd of January.

Fence Panels: 7 to 14 days

Accessories (automation kits, intercoms etc): 1 to 2 working days.

This is a week commencing date and can therefore be any day from the 22nd till the 29th of Janurary. For a more accurate time, please call our team on 0800 6124 965.

Need it faster? Call our team to discuss our Express Service. We can provide wooden gates, unstained in as little as 5 days.

DELIVERY CHARGES:

SPECIAL OFFER: Free Delivery on orders over £750 – save up to £199

  • Garden Gates: £19
  • Side/ Pedestrian Gates: £29
  • Fence Panels & Railings: £29 (one off charge not per panel)
  • Driveway Gates (softwood): £49
  • Driveway Gates (Hardwood): £99
  • Metal Framed Driveway Gates: £199
  • Sliding Gates: £199
  • Sliding Gate Kit (if purchased without a gate): £99

Hinge Mounting Options

Metal driveway gates are always fitted to pins mounted on metal posts, walls or timber. You simply lift the gate on to the pins to hang.

We offer three different options:

Option 1: (free with gate)

Adjustable gate hinges. Hook on plates.

Included free with gate. Hinge pin plates with adjustable bolts. These can be attached to existing walls, timber posts or metal posts.

Please note: As we do not know what material these plates are being connected to, fixings are not included.

Option 2:

Metal posts for driveway gates

Purchase new metal posts from us with your gate. The posts will have the hinge pins welded to them. Due to the sheer weight of metal gates, these posts are designed to be fitted in the ground. As standard, the position of the hinge will be 6″ (150mm) from the bottom edge of gate and 6″ (150mm) from top edge of gate. The colour of your metal posts will match the colour you have chosen for the gate.

Option 3:

Gate pins on pillars

Your posts or pillars already have pins in place. We can manufacture your new gate so that it can drop directly on to existing gate pins. Please call our team to order (0800 6124 965). They will explain in detail what measurements we need to take.

Hanging Options

There are two ways that you can mount your metal driveway gates, inner face of the posts/pillars or on rear face of the posts/ pillars. Most people opt to have the gate hung using the inner face method (figure 1 below).

Figure 1:

Driveway Gate Mounting

Hinge plates mounted to inner face of post/ pillar. Gate to be mounted central between the posts.

REDUCE 150mm (approx. 6″) from your lowest measurement for gap clearance.

If adding underground automation, reduce the lowest measurement by 110mm.

Figure 2:

How-to-calculate-gap-size-on-metal-driveway-gates

Gates to open towards driveway. Hinge plates mounted to rear face of post/ pillar. Back edge of gate sits flush with the back edge of post/ pillar.

REDUCE 50mm (2″) from your lowest measurement.

Gate Features

PREMIUM FRAME SYSTEM

For durability, aesthetics and performance our gates are constructed using thicker materials.

How to install metal driveway gates

Any competent DIYer is able to fit there manual driveway gate, we do recommend professional installation if having automation.

Check out the guide here.

  • DOWNLOAD PDF GUIDE

Really "make an entrance!" - Latest customer images

What our customers think

The whole process from ordering to delivery was painless, chose online as price was good, phoned to order and staff were very knowledgeable and helpful, delivery was just over a week which was super speedy. I called back before delivery to add a stain which again was no trouble for them. Kept in the loop the whole time with text and emails from both Gates and Fences and the delivery firm. First class service all round. Thank you 😊
Mrs Fealey First class service
Very pleased with our HUGE new bespoke wooden gates, thanks. Professional, prompt & friendly comms throughout, from the factory tour last year to the careful attention in getting the sizing right and helping to ensure that my existing hinge arrangement would fit. Delivered (in superb protective wrapping) within a fortnight of ordering. Superb.
Chris Tunnicliffe Fast and fastidious
We ordered a new front gate and side gate from Gates and Fences and are very happy with the results. Good communication throughout to make sure we ordered the correct sizes and the gates arrived swiftly upon accepting the quote.
Resonate We ordered a new front gate and side…
My driveway gates have been delivered – but still in the packaging they arrived in & not yet fitted. As a result, my feedback is based purely on the ordering process……..which i cannot fault. I’m not a DIYer so Lisa has provided help and support throughout the ordering process. Thank-you!
Steve Little My driveway gates have been delivered
I ordered on line at the weekend but had some questions that I raised on the order. I got a phone call on Monday am. this answered my questions and suggested a slight change to the order. This was cleared through by E-mail same day. Next day it entered production and arrived well packed on Friday. Quality seems great. Gates fitted easily and we have had many positive comments. Impressive service!
William Fryers Impressive service!
Our fitter sourced our new driveway gates from gates and fences. He has used them before and informed us of the quality. Nervously, we agreed. We didn’t see the gates before our fitters had finished. Now they’re up we are over the moon. I’m not a carpenter but can see the work that’s gone into them. Really happy with our fitter and the manufacturer.
S Jackson Our fitter sourced our new driveway
Wow – what a great product and unbelievable customer service. From order to delivery was less than 10 days with detailed text status at every stage of the production and shipment. The online guidance regarding measuring was very clear and easy to follow. Now the driveway gates are installed they actually look better than I anticipated. Shipment packaging was seriously robust too. Will definitely be using again for my garden gates.
MR J O'HARA Greatest Customer Service ever