THE CHARLTON DRIVEWAY GATE:
Stylish, secure and modern driveway gate design. The Charlton features a flat top with horizontal 40mm x 20mm rectangle bars set within a deep 40mm x 40mm framework to create an architectural gate design. Manufactured by hand in the UK by skilled craftsmen using the finest materials to provide ultimate durability and quality.
All of our gates come complete with a 10 year workmanship guarantee, adjustable hinges, latch, 2 x drop bolts.
How to Measure: Take three measurements (top, middle and bottom) horizontally between the pillars. Reduce size by 50mm (2″) if mounting hinges to back of post/ pillar or 150mm (6″) if mounting hinges to inner face of posts/ pillars. See “How to Measure” for more information
Width of Gate: Taken as if both sides were touching each other. For example, a width from the drop down menu of 10ft (3m 048mm) would be 2 x 5ft wide. If you are measuring a gap between existing posts/ pillars, we recommend reducing the opening size by 6″ (150mm) to allow for hinge/ pins and centre clearance.
Height of Gate: Taken to the highest point of each gate. We recommend allowing a 50mm (2″) clearance between the bottom edge of gate and driveway (as long as the drive is level). If you require a more exact height, please contact us to order.
Gate Furniture Included (hinges etc): 4 x adjustable hinges, hinge pins, latch and drop bolts included with each gate. As standard, the position of the hinge will be 6″ (150mm) from the bottom edge of gate and 6″ (150mm) from top edge of gate. If you require these to be different (if for example you already have pins set into a post/ pillar), please call us.
Metal Hanging Gate Posts: Our posts come with a feature pyramid post cap and the hanging pins pre welded so once the posts are fitted the gates can be easily hung onto the pins. The finish of them is the same as the finish you choose for your gate. We correctly match the height of your post for you to suit your gate. Choose between wall fitted posts (requires bolts to fix to your wall and the post holes drilled on site) or below ground which can be concreted in.nnWe recommend:n2 x 80mm x 80mm for opening under 8ft widen2 x 100mm x 100mm for opening width 8ft and overn2 x 120mm x 120mm for opening width 10ft and over (if your gate is under 4ft tall then a 100mm x 100mm will be suitable)nnSupplied to allow the posts to sit in the ground to a depth of 1ft 5″ (450mm). The post will arrive cut to size (therefore, if you selected a gate height of 3ft 6″, the post length will be 4ft 11″) unless above ground post is chosen.
Size of Gate not listed? No problem, call us with your exact size.
