For manual or electric sliding gates. In ground or bolt to ground track system. Designed and made by us to fit your requirements.
£609.00 (inc VAT)
Eco-Friendly
95% Recycled Materials
"UltraSheild" Technology
Advanced UV Protection
Made to Measure
Expertly Crafted in the UK
Free Nationwide Delivery
0% Finance Available
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 50mm wide each) = 1m 160mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.
Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.
To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).
Option 2: Gate mounted in alley way or similar.
This set up example would be used if placing the gate in an alley way or similar. The allowance on the hinge side is greater and does create a visible see through section.
Reduce 100mm (or 4″) from your lowest measurement.
Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.
Estimated Delivery Time: Monday 17th February to Friday 21st February.
FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
£609.00 (inc VAT)
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 50mm wide each) = 1m 160mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.
Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.
To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).
Option 2: Gate mounted in alley way or similar.
This set up example would be used if placing the gate in an alley way or similar. The allowance on the hinge side is greater and does create a visible see through section.
Reduce 100mm (or 4″) from your lowest measurement.
Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.
Estimated Delivery Time: Monday 17th February to Friday 21st February.
FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
£609.00 (inc VAT)
Oxford Composite Garden Gate. Eco friendly composite garden gate. Constructed from 60% bamboo (FSC® 100% Certified) and 40% recycled High Density Polyethylene, environmentally gentle bonding agent, additives and tint. Saving these materials from landfill, giving them value and recycling them into a long life product, provides a harmonious solution to sustainable living all set within a deep metal frame using UK steel to produce an extremely durable and low maintenance gate.
Estimated Delivery Time: Monday 17th February to Friday 21st February.
FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
Eco-friendly composite side gate combining a deep metal frame with the latest composite board to create a gate that “really makes an entrance”. Constructed from 95% recycled materials and fully recyclable making it an extremely environmentally friendly gate.
"UltraShield" Technology
Composite that is built differently. With UltraShield, a wipe-clean is all you need to keep your boards looking as good as the day you bought them. With it’s unique UltraShield formula fully capped around every board, there is no worrying about the traditional fading, staining, or mildew issues that often face timber gates. UltraShield is simply the best solution for minimal maintenance and maximum visual impact. Boasting a market leading 10 year colour warranty.
Need a taller gate? See Composite Side Gates.
Matching Driveway Gates, Sliding Gates and Railings available.
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 50mm wide each) = 1m 160mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.
Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.
To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).
Option 2: Gate mounted in alley way or similar.
This set up example would be used if placing the gate in an alley way or similar. The allowance on the hinge side is greater and does create a visible see through section.
Reduce 100mm (or 4″) from your lowest measurement.
Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.
Produced using our “Premium” frame system. The depth, thickness and quality of materials used in the construction of metal framed composite gates is a key factor on how the gate will look and perform. We only use the finest steel that’s thicker than many of our competitors. This ultimately produces a long lasting gate that really does “make an entrance”.
| GATE MATERIAL | |
| FRAME | 40mm x 40mm |
| REAR BRACING | 30mm x 15mm Structural Bars |
| COMPOSITE | 95% Recycled Materials – UltraShield |
| HANDLE | Key Lock and Handle Included |
| BOARD SIZE | Depth 21mm x 139mm |
| HANDCRAFTED | Made in the UK |
| SIZE | Bespoke Available |
Estimated Delivery Time: Monday 17th February to Friday 21st February.
FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See "here" for more.
This gate comes complete with:
Easily! Simply wash your composite gate down with warm, soapy water and rinse off. Any chips to the frame can be touched up using a paint pen.
Composite gates are the easiest material to maintain…no need for painting or staining.
All of our gates can be installed by any competent DIY’er. We recommend professional installation if having gates that are automated (electric).
See here for the installation guide.
We offer 5 different boards, Anthracite Grey, Light Grey (Stone), Teak, Antique or Walnut. The board is capped 360 degrees which will give the board maximum protection against mold/mildew, stains, fading, cracking, cupping, and swelling.
To order your free samples, please see here.
Fully fitted Locinox 40 security handle and lock system. Supplied with 3 keys and available in black or chrome.
Insert Lock with 100% stainless steel mechanism. The Stainless steel and adjustable self-latching bolt combined with the right keep guarantee a strong and solid closed gate where the gate wings can not be pulled apart or forced open.
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 50mm wide each) = 1m 160mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.
Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.
To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).
Option 2: Gate mounted in alley way or similar.
This set up example would be used if placing the gate in an alley way or similar. The allowance on the hinge side is greater and does create a visible see through section.
Reduce 100mm (or 4″) from your lowest measurement.
Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order - 0800 6124 965.
Reviews
Clear filtersThere are no reviews yet.