10yr Warranty
on Welds
Crafted by Hand
in the UK
Premium Frame
System
Your Gate
Your Colour!
Portsmouth Composite Garden Gate
£579.00 (inc VAT)
- Eco-friendly
- 95% Recycled Materials
- UltraShield Technology
- Advanced UV Protection
- Made to any size
- Free Nationwide Delivery
- Expertly crafted in the UK
- 0% Finance Available
Estimated Delivery Time: Monday 23rd June to Friday 27th June.
FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See “here” for more.
Simply take three horizontal measurements between existing posts/ pillars…top, middle and bottom. Take SMALLEST width. Then decide how it will hang.
Reduce width by 50mm (2″)
Reduce width by 100mm (4″)
Width: Actual width of gate.
Height: Taken from lowest to highest point of the gate including the horns. We recommend a ground clearance from floor to bottom of gate of 50mm (2″) .
How to Measure
Simply take three horizontal measurements between existing posts/ pillars…top, middle and bottom. Take SMALLEST width. Then decide how it will hang.
Reduce width by 50mm (2″)
Reduce width by 100mm (4″)
Delivery
Estimated Delivery Time: Monday 23rd June to Friday 27th June.
FREE (mainland) delivery on orders over £750 (excludes Scotland). Orders under this amount are subject to a delivery charge depending on product. See “here” for more.
Size Guide
Width: Actual width of gate.
Height: Taken from lowest to highest point of the gate including the horns. We recommend a ground clearance from floor to bottom of gate of 50mm (2″) .
Need advice?
Call our team on 0800 6124 965
Monday to Friday 9am to 5pm
0%
Finance Available.
Up to £6000. Spread the costs. Apply at checkout or call for more details.
COMPOSITE GARDEN GATES
The Beauty of Composite
Eco-friendly composite side gate combining a deep metal frame with the latest composite board to create a gate that “really makes an entrance”. Constructed from 95% recycled materials and fully recyclable making it an extremely environmentally friendly gate.
Ultra Shield Technology
Composite that is built differently. With UltraShield, a wipe-clean is all you need to keep your boards looking as good as the day you bought them. With it’s unique UltraShield formula fully capped around every board, there is no worrying about the traditional fading, staining, or mildew issues that often face timber gates. UltraShield is simply the best solution for minimal maintenance and maximum visual impact. Boasting a market leading 10 year colour warranty.
Included with Gate
This gate comes complete with:
- Opening/ closing latch
- Adjustable hinges
- Choice of frame colour: Black, Anthracite Grey or White (any RAL available at additional charge)
- Composite: Anthracite Grey, Walnut, Teak, Light Grey (stone), Ebony (black) or Antique.
Colour Choice
We offer 6 different boards, Anthracite Grey, Light Grey (Stone), Teak, Antique, Walnut or Ebony (black). The board is capped 360 degrees which will give the board maximum protection against mold/mildew, stains, fading, cracking, cupping, and swelling.
To order your free samples, please see here.
Anthracite Grey
Light Grey (stone)
Teak
Antique
Walnut
Ebony (black)
METAL SIDE GATES
How to Measure
Measuring for your new gate is actually a very simple process.
If existing posts/ pillars are in place, take three horizontal measurements. Top, middle and bottom as shown below.
Make a note of the SMALLEST width.
** If you are replacing the posts, take a measurement of the whole opening width and reduce size by the width of the posts. For example: Opening width of 1m 260mm minus 2x posts (at 50mm wide each) = 1m 160mm.
Next, decide how the gate will hang and reduce width accordingly. The is by far the most popular option.
Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post.
To calculate gate width: Take the lowest measurement and reduce by 50mm (2″).
This set up example would be used if placing the gate in an alley way or similar. The allowance on the hinge side is greater and does create a visible see through section.
Reduce 100mm (or 4″) from your lowest measurement.
Please note: If purchasing metal posts with your gate, hinge pins will be welded to the post. If not, we supply hinge pin plates for you to fix to existing posts/ pillars.
If ordering online and exact measurement not offered. Reduce to closest size. Want it exact? No problem, call our team to order – 0800 6124 965.